Guide

Roofing Guides

Metal roofing, asphalt shingles, and roofing accessories

Featured Brand Guides

Explore All Brands
  • Fabral Metal Roofing and Wall Panels

    Compare Fabral metal roofing and wall panels by roof slope, seam style, hail rating, and installation method, with practical guidance on choosing colors.

    Read more
  • GAF Roofing | Western Building Center

    GAF roofing products at Western Building Center. Timberline shingles, underlayment, and roofing accessories for Montana homes.

    Read more
  • Metal Sales Roofing, Wall Panels and Trim

    Metal Sales roofing, wall panels and trim help finish homes and farm buildings. Compare panel uses, trim fasteners and the difference in edge coverage.

    Read more

Top Products

Roofing Felt & Underlayment: How to Pick the Right Type for a Montana Roof

Underlayment is the layer that goes down on the roof deck before shingles or metal panels. Most folks think the shingles are the whole roof. They're not. Underlayment is a water-resistant or waterproof barrier material installed directly onto the roof deck before any roofing material goes on top, se

Metal Flashing: How to Pick the Right Type and Metal for a Montana Roof

Flashing is the engineered metal that seals the joints, edges, and penetrations where a roof is most likely to leak. It seals roof penetrations (vent pipes, exhaust fans, skylights, chimneys) and creates a watertight barrier that redirects water away from vulnerable areas, preventing leaks and dam

Cedar Shakes and Shingles: A Buyer's Guide for Montana Roofs

Cedar roofing is natural wood, made from either Western Red Cedar or Alaskan Yellow Cedar. The single decision that determines whether a cedar roof survives Montana freeze-thaw cycling is grade. The quality of the installed shakes or shingles will largely determine the longevity of a cedar roof. Th

Rolled Valley: A Roofing Buyer's Guide for Snow Country

Rolled valley is the metal that lines the valley of a roof, a continuous metal strip used to line roof valleys, creating a channel that directs water away from roof joints and off the deck. It ships as a coil, gets cut to length on site, and forms the waterproofing surface in the single hardest-wor

Metal Roofing Screws: How to Pick the Right One for a Montana Roof

Fasteners are the cheapest part of a metal roof and the part most likely to sink it. For metal roofs, fasteners make up less than 1% of the total cost of installation, yet they can result in 100% of the roof's failure. Pick the wrong screw, wrong substrate, wrong material, wrong length, or drive it

White Metal Gutters: Sizes, Fittings and Downspouts

Choose white metal gutters, matching fittings and downspouts for your home or metal building. Get clear advice on aluminum, rust, sizing and Montana weather.

Asphalt Shingles: How to Choose the Right Grade for a Montana Roof

Asphalt shingles are fiberglass mats coated with asphalt and ceramic granules. They're the most common, cost-effective residential roofing material. More than 80 percent of all residential roofing applied in the U.S. is currently produced by the asphalt roofing industry. There's a reason for that. T

Metal Rain Gutters: Choosing the Right System for Montana Roofs

Metal rain gutters channel roof runoff away from the structure, and the material you pick decides how long the system lasts and how well it holds up through freeze-thaw winters. Aluminum is the industry standard for its rust resistance, color variety, and 20 to 30-year lifespan. For Montana's snow l

Metal Roof Closures and Mastic: How to Seal a Metal Roof Right

Closures and mastic are the cheap accessories that decide whether a metal roof stays dry. The panels shed water. That's their job. But ribbed and corrugated metal isn't flat, and closure strips are specialized inserts designed to fill the gaps between metal roofing panels and flat surfaces like the

Rain Gutters: How to Choose the Right Profile, Size, and Material

A house needs a roof and siding to keep the furniture dry. A house also needs rain gutters to keep slabs, basements, and crawlspaces drier by directing water away from the structure. Gutters reduce the moisture load on siding, windows, and doors, which in turn increases the life span of exterior fin

Everything in Roofing

Epic Steel

Epic Steel 7.2″ Box Rib Panels (24 Gauge)

Epic Steel's 7.2″ Box Rib Panel delivers 50,000 psi minimum yield strength in a 24-gauge profile that spans longer distances than standard corrugated panels. The deep 1.5-inch ribs create exceptional flexural stiffness, contractors get the structural capacity they need without adding intermediate s

GAF

GAF WeatherWatch: Ice Dam Protection That Actually Works

GAF WeatherWatch delivers measurable ice dam and leak protection with 200 sq ft coverage, fiberglass reinforcement, and self-sealing technology. This mineral-surfaced barrier protects the vulnerable spots: eaves, valleys, rakes, and around roof penetrations like chimneys and skylights. For Montana

Fabral

Fabral 2½″ Corrugated - 29 GA Galvanized

Fabral's 2½″ Corrugated 29-gauge galvanized steel panels deliver Class 4 hail resistance and 50+ year durability at 0.65 pounds per square foot, making them a practical choice for Montana's agricultural buildings, shops, and roofing projects where value matters. The corrugated profile has earned it

Fabral

Fabral Ultra Loc Metal Roofing System

Fabral's Ultra Loc combines concealed fastener convenience with standing seam performance in a 26-gauge panel that challenges conventional wisdom about gauge requirements. The system delivers UL 790 Class A fire resistance and UL 2218 Class 4 impact resistance, matching or exceeding many heavier-

Taylor Metal Products

Taylor Metal Products Zincalume® Plus AZ-55 (26 Gauge)

Zincalume® Plus AZ-55 combines a 55% aluminum, 45% zinc alloy coating with a clear acrylic resin layer over 26-gauge steel (approximately 0.018 inches thick). The resin coating solves several jobsite headaches. It resists scuff marks and fingerprints during handling, prevents wet-stack storage stai

GAF

GAF Ruberoid White Granule Torch Membrane: Lightweight Modified Bitumen That Delivers

GAF's torch membrane solves the weight problem that traditional built-up roofing can't touch. At less than 2 pounds per square foot for standard applications, this APP-modified membrane cuts structural load by more than half compared to hot-mopped systems while delivering the durability contractors

GAF

GAF GafGlas Base Sheet Membrane 3SQ

GAF's GafGlas #75 Base Sheet is a 300 sq ft commercial-grade membrane that solves the bleed-through problems nailable substrates create on low-slope roofs. At 68 lbs per roll with fiberglass mat reinforced with asphalt coating on both sides, it's built for commercial durability without being unmanag

DaVinci

DaVinci Province Slate

DaVinci Province Slate delivers composite polymer roofing tiles with Class 4 impact and Class A fire ratings in a self-aligning design that installs faster than natural slate. The 12" x 11.5" single-width tiles create an 8" exposure and handle Montana's freeze-thaw cycles through virgin resin constr

Fabral

Fabral Ultra Loc 16 - 26 GA Galvalume

This 26-gauge standing seam panel combines concealed fastener aesthetics with proven impact resistance (UL 2218 Class 4) and straightforward installation over solid decking. Montana contractors dealing with hail-prone regions and insurance requirements get certified protection without the complexity

DaVinci

DaVinci Single-Width Shake

DaVinci Single-Width Shake delivers a Class A fire rating, the only synthetic shake at 9-inch single width that hits this mark while maintaining authentic cedar appearance. Contractors get Class 4 impact rating (UL 2218) and 110 MPH wind resistance certified, solving Montana's hail and chinook wind

Taylor Metal Products

Taylor Metal Products Kodiak Brown ArmorTech™ Coating (26 Gauge)

Kodiak Brown ArmorTech™ delivers a 40-year warranted performance through measurable chalk and fade resistance. The coating hits the sweet spot for contractors who need proven durability, rating 8 or higher for chalking resistance and limiting color fade to 5 Delta E units over four decades.

Fabral

Fabral Grandrib 3® 29 GA Galvalume (WeatherXL SMP)

This 29-gauge panel delivers 80,000 psi tensile strength, stronger than many 26-gauge competitors, while carrying comprehensive UL certifications that matter for Montana's weather extremes. The high-tensile steel construction means contractors get durability without the weight penalty of thicker gauge

Pabco

Pabco Weathered Wood 30-Year Laminated Shingle

This heavyweight laminated shingle delivers UL 2218 Class 3 impact resistance and 110-130 mph wind ratings at 260 pounds per square, specs that matter when you're building in Montana's hail corridors and chinook wind zones. It carries a 30-year fully-transferable warranty backed by limited lifetime

Fabral

Fabral Grandrib 3 Plus: The 80,000 PSI Panel That Changes Everything

The Grandrib 3 Plus isn't just another exposed-fastener metal panel. At 80,000 PSI minimum yield strength, this 29-gauge galvanized steel outperforms typical 26-gauge panels rated at 40,000 PSI, delivering up to 50% more strength in a thinner profile. Combined with a 10-layer protective coating sys

Fabral

Fabral WeatherXL: SMP Performance at Agricultural Prices

WeatherXL's two-coat paint system delivers the color retention contractors want without the PVDF price tag. This Silicone Modified Polyester (SMP) coating splits the difference between basic polyester and premium Kynar, better scratch resistance than standard coatings, 30-year fade/chal

DaVinci

DaVinci Multi-Width Slate

DaVinci Multi-Width Slate delivers what Montana contractors need most: authentic slate appearance at one-quarter the weight of natural stone. This composite roofing system combines five pre-sorted widths (6", 7", 9", 10", and 12") with Class 4 impact resistance and 110 MPH wind ratings, specifications that matter for snow loads and summer hail storms.

Fabral

Fabral 2½″ Corrugated - .010 Galvanized

Fabral's 30-gauge (.010 inches) corrugated panel represents the thinnest option in their corrugated line, designed for contractors who need an economical exposed-fastener panel where extreme snow loads aren't the primary concern. This ultra-light gauge suits temporary structures, equipment sheds, an

Pabco

Pabco Shadow Cap Weathered Wood Hip & Ridge Shingles

The Pabco Shadow Cap Weathered Wood ridge cap covers 41-1/4 linear feet per bundle with each 39-3/8 inch shingle cut into 3 individual pieces. The Shadow Cap Wide variant provides 31 linear feet per bundle with a 3-inch wider profile designed specifically for vented ridge applications. Both deliver prove

GAF

GAF DeckArmor Premium Breathable Roof Deck Protection

GAF DeckArmor solves the moisture trap problem that standard synthetics can't touch. 16 perms of vapor transmission: breathable enough to prevent condensation buildup while still blocking wind-driven rain. At 37 lbs per roll versus 100 lbs for #30 felt, crews haul fewer rolls up the ladder. For job

DaVinci

DaVinci Hip & Ridge Tiles: One-Piece Solution for Montana's Extreme Roofing Demands

DaVinci's one-piece hinged hip & ridge tiles offer contractors the fastest installation with 10 linear feet per bundle coverage: a game-changer when racing Montana's short construction season. These composite tiles handle roof pitches from 0° to 45°, meaning one product inventory covers everything

Grip Rite

Grip Rite High-Temp Ice & Water Shield Underlayment 2SQ

Grip Rite's High-Temp Ice & Water Shield (model SL2SQHT) is a 3 ft x 67 ft self-adhering underlayment that delivers 200-201 square feet of coverage per roll: a full third more coverage than standard 150-square-foot rolls from competitors. At 265°F functional range, it's the highest-temperature ice

Epic Steel

Epic Steel 7/8″ Corrugated Panels - Charcoal Gray (24 Gauge)

Epic Steel's 7/8″ Corrugated Panels in 24-gauge deliver 50,000 psi yield strength (Grade D), numbers that matter when Montana weather throws everything it's got at a roof. These panels carry UL 2218 Class 4 hail impact rating, UL 580 Class 90 wind uplift, and UL 790 Class A fire rating. For contrac

Epic Steel

Epic Steel Ridge Cap (Bent to pitch)

Custom-bent ridge caps solve the gap problem that universal caps can't touch. Precision fabricated to the roof's specific angle for a flush fit, Epic Steel's bent-to-pitch ridge caps eliminate the water infiltration points that plague adjustable alternatives. For Montana contractors dealing with 50-

Taylor Metal Products

Taylor Metal Products Polar White ArmorTech™ Coating (26 Gauge)

Taylor Metal's Polar White ArmorTech™ coating on 26-gauge steel delivers the only metal panel in its class with a 40-year warranty and an independently tested Solar Reflectance Index (SRI) of 90. For Montana contractors dealing with intense summer sun and extreme temperature swings, that SRI 90 rati

GAF

GAF ProStart Starter Strip: Factory-Applied Adhesive That Actually Works

GAF ProStart starter strips solve the wind blow-off problem that costs contractors callbacks and warranty claims. The Dura Grip™ factory-applied adhesive is positioned specifically to prevent shingle blow-off, eliminating the guesswork and inconsistency of manual cement application.

DaVinci

DaVinci Hip & Ridge Tiles (Two-Piece): Synthetic Slate Performance for Montana Rooflines

DaVinci's two-piece hip and ridge tiles deliver Class 4 impact resistance and lifetime warranty protection at 7x18 inches with precise 6-inch exposure. These synthetic composite tiles offer contractors a lighter-weight, maintenance-free alternative to natural slate, engineered specifically for the p

Fabral

Fabral Mighti-Rib / PBR 26 GA Galvalume

The Mighti-Rib/PBR 26 GA Galvalume delivers 194 psf load capacity at 3-foot spacing, enough muscle for Montana's heaviest snow zones. With UL 2218 Class 4 hail resistance and UL 790 Class A fire rating, this panel earns its place on agricultural and commercial buildings where performance matters mo

DaVinci

DaVinci Select Shake Composite Roofing

DaVinci Select Shake delivers Class 4 impact resistance and authentic cedar aesthetics in a composite shake that contractors can install faster than natural wood. At 2.8 pounds per square foot, it won't overload existing structures like heavier alternatives. For Montana contractors dealing with 300

Epic Steel

Epic Steel 3' Tuf-Rib Panel - 28 Gauge Stock Colors

Epic Steel's 3' Tuf-Rib delivers contractor-grade durability at 1.98 pounds per linear foot with 80,000 psi yield strength. This 28-gauge exposed-fastener panel provides 36 inches of coverage per sheet and handles Montana's weather extremes with UL 2218 Class 4 hail resistance and UL 580 Class 90 wi

DaVinci

DaVinci Multi-Width Shake

DaVinci Multi-Width Shake solves the monotony problem that plagues most synthetic roofing. Five different widths (4", 6", 7", 8", and 9") create genuine randomness across the roof. For Montana contractors dealing with Class 4 hail zones and increasing wildfire risk, this product delivers the highe

GAF

GAF TimberTex Barkwood Hip & Ridge: Worth the Premium for Montana Roofs

Worth it for contractors who need proven wind resistance and fast installation. The 195% thicker than single-layer ridge caps construction saves callbacks, the two nails per piece installation goes quick, and the kit handles everything from residential re-roofs to new construction. At 82 lbs per bun

CertainTeed Landmark

Landmark 30 Year Weathered Wood Shingles

Landmark 30 Year Weathered Wood shingles deliver proven 110 mph wind resistance and 25-year algae protection with Easy Install sealing strips that cut installation time. At 240 pounds per square and UL Class A fire rated, these architectural shingles handle Montana's wind events while providing the

Pabco

Pabco Ridge Pewter Gray 9-Inch Ridge Cap

Pabco's ridge cap earns its place through sheer coverage efficiency, 41.25 linear feet per bundle versus the competition's 25-30 feet. That's 65% more coverage than GAF (25 ft/bundle). For contractors running crews across Montana's short building season, fewer bundles means fewer trips up the ladde

Epic Steel

Epic Steel 7/8″ Corrugated Panels (24 Gauge): Superior Coverage and Hail Resistance for Montana Projects

Epic Steel's 7/8" corrugated panels deliver the coverage efficiency and weather resistance that Montana contractors need. At 34 inches of roof coverage per 40-inch panel, these 24-gauge panels provide approximately 60% more roofing coverage per panel than standard 1/2" corrugated options. With UL 22

GAF

GAF Timberline HDZ Weathered Wood Shingles

GAF Timberline HDZ Weathered Wood delivers UL 2218 Class 3 impact resistance with 33.33 sq ft bundle coverage and algae protection that actually works. The laminated construction features ASTM D 8098-type algae-resistant granules and high-definition color granules with patented shadow bands for wood-sh

Epic Steel

Epic Steel 2½″ Corrugated Panel - 24 Gauge Stock Colors

Epic Steel's 2½″ Corrugated Panel delivers what Montana roofing contractors need most, a 40-year warranty against corrosion, Energy Star rated paint that handles temperature extremes, and a 3:12 minimum slope that works with snow loads. At 24 gauge thickness (not the 28 gauge listed in some referen

Pabco

Pabco Universal Starter Shingles: The Perforated Time-Saver Montana Contractors Actually Want

Pabco Universal Starter Shingles solve the tedious manual cutting problem with a perforated design that splits 40" x 13-1/4" shingles lengthwise into two starter pieces. Each bundle contains 22 shingles that yield 44 starter pieces covering 73.33 linear feet, enough for most single-story homes in o

Fabral

Fabral 1½" SSR 150 - 24 GA Galvalume

The SSR 150 delivers genuine concealed-fastener performance at a 1:12 minimum slope, flatter than most residential metal panels can handle. For agricultural buildings and low-slope residential projects, it offers UL-certified protection against Montana's worst weather.

Epic Steel

Epic Steel 7.2″ Box Rib: The Heavy-Duty Profile That Delivers

Epic Steel's 7.2″ Box Rib delivers the deepest rib profile in their exposed fastener line. At 1.5 inches high, those ribs shed water better than competitors' shallow profiles while giving buildings the bold, structural look contractors want. Fast 2-3 day lead times for stock colors mean Montana cont

Pabco

PABCO Shadow Cap Wide Ridge Cap in Driftwood: Built for Montana's Vented Ridge Systems

Worth it for contractors who need superior vented ridge coverage. The Shadow Cap Wide delivers 3 inches more width than standard ridge caps, specifically engineered to work with ridge vents without blocking airflow. At 31 linear feet per bundle and a 5-5/8 inch exposure, it handles Montana's demandi

Fabral

Fabral 1½″ SSR 150 - 24 GA Galvalume

The 1½″ SSR 150 delivers a concealed-fastener standing seam system that handles slopes down to 1:12, rare capability for residential metal roofing. Factory-applied 1/8″ butyl sealant bead eliminates the guesswork of field-applied sealants. UL 2218 Class 4 hail resistance means this panel survives t

GAF

GAF Tiger Paw Underlayment: Built for Montana's Punishment

600% stronger tear resistance than #30 felt. That's the number that matters when you're dealing with Montana wind and weather. GAF Tiger Paw synthetic underlayment delivers 7 times the tear strength of standard felt (ASTM D4533) while offering up to 180 days UV exposure protection, crucial flexibil

GAF

GAF HDZ Shingles: The 600% Larger Nailing Zone That Changes Everything

GAF HDZ shingles solve the installation accuracy problem with their StrikeZone nailing area, up to 600% larger than standard HD shingles, delivering 99.9% nailing accuracy. That's not marketing fluff. That's measurable improvement on a roof where every nail matters.

Pabco

Pabco Premier Driftwood 30-Year Laminated Shingle

Worth it for contractors who need that 15-year non-prorated warranty period. PABCO Premier offers a 15-year non-prorated warranty period, which is longer than some competitors' 10-year standard, the longest non-prorated coverage at this level. Fully non-prorated coverage including material and inst

Taylor Metal Products

Taylor Metal Products Ash Grey ArmorTech™ Coating (26 Gauge)

Taylor Metal's ArmorTech coating in 26-gauge Ash Grey delivers measurable performance for contractors who need roofing and siding that'll survive Montana's temperature swings and UV exposure. The silicon modified polyester (SMP) chemistry carries a 40-year limited warranty, not marketing fluff, but

Fabral

Fabral GrandRib Liner: Interior Metal Panels Built for Agricultural Reality

The GrandRib Liner solves the interior finishing problem that exterior metal panels can't touch. This 29-gauge galvanized steel system brings perforated acoustical options and consistent white finishes to barns, sheds, and commercial buildings, where noise control and clean appearance matter more t

Pabco

Pabco Premier Antique Black: Wind-Rated Architectural Shingles for Montana Roofs

Pabco's Premier Antique Black delivers 130 mph wind resistance in a 30-year architectural laminated shingle that weighs 65-72.5 pounds per bundle. Worth it for Montana contractors who need proven wind ratings and fire resistance without paying for premium-tier warranties they don't need.

Fabral

Fabral UltraLoc 16 - 26 GA Galvalume

UltraLoc 16 delivers 26-gauge Galvalume standing seam roofing with concealed fasteners and 16-inch coverage, a combination that speeds installation while providing the weather protection Montana construction demands. The 1-inch seam height and 3:12 minimum slope make it practical for retrofitting o