Fabral metal roofing and wall panels are for homeowners and builders covering houses, shops, commercial buildings, and agricultural buildings. Grandrib 3 and Horizon 16 both list Class 4 hail resistance and Class A fire resistance, giving you rated options in different panel styles.
Fabral manufactures metal roofing and wall systems. The company was founded in 1967. Its range includes structural-steel Grandrib roofing and siding, standing-seam roofing, and architectural wall panels.
Match the panel to the roof
Start with the measured slope. The easy mistake is picking the appearance before checking the pitch. Grandrib 3 requires at least 2½:12, Horizon 16 requires 3:12, and SSR 150 allows 1:12.
Grandrib 3 works for roofing and siding, so you can carry the profile across a shop’s roof and walls. Mighti-Rib also serves both applications and lists a minimum roof slope of 1:12.
For a standing-seam appearance, Horizon 16 has snap-lock seams and standard stiffening ribs. SSR 150 has taller seams and standard shadow lines. If you want SSR 150 without shadow lines, specify that when ordering.
Installation follows the panel choice
Settle on the panel before planning the fastening and seaming work. Horizon 16 uses a nail-flange installation system. Mighti-Rib uses exposed fasteners, while PowerSeam is mechanically seamed. Those differences change the attachment work and the equipment involved.
Fabral roofing installation takes specific skills and knowledge. Match the installation plan to the selected system, including its fastening method and seam work.
Choose the color with the whole exterior in view
Fabral’s residential and agricultural color offering includes the Grandrib and Horizon series, trim, and soffit panels. Its free color visualizer helps you compare the roof and walls together.
Use the visualizer to narrow your choices, then compare a physical finish sample beside the siding in sun and shade.
Plan the sheets and the roof assembly
Figure material quantities using installed coverage after the panels overlap. Fabral’s 2½-inch Corrugated panel covers 24 inches on walls and 21⅓ inches on roofs. Use the roof coverage when calculating roofing quantities.
Grandrib 3 and SSR 150 can be custom cut up to 40 feet; Horizon 16 comes in lengths from 5 to 40 feet. Longer sheets can reduce end laps. Plan how they’ll be lifted and supported before choosing full-length sheets.
Underlayment and insulation matter to metal-roof noise control. For a roof over living space, plan those layers alongside the panels.
Grandrib 3 is eligible for the Limited Lifetime Enduracote Paint Warranty. Keep finish coverage tied to the named panel and paint system when comparing choices.
Panel specifications
Roof slope expresses vertical rise for every 12 inches of horizontal run.
| Panel line | Minimum roof slope | Installed coverage | Rib or seam height |
|---|---|---|---|
| Grandrib 3 | 2½:12 | 36 inches | ¾-inch rib |
| Horizon 16 | 3:12 | 16 inches | 1-inch seam |
| 1½-inch SSR 150 | 1:12 | 16 inches | 1½-inch seam |
| 2½-inch Corrugated | 2½:12 | 21⅓ inches on roofs; 24 inches on walls | ½-inch rib |
Frequently Asked Questions
How do you install Fabral metal roofing?
Follow the instructions for the Fabral panel you’re using, because the attachment method and seam work change with the system. Getting the first sheet square matters; a crooked start carries across the roof. You need the fastening schedule for your roof assembly, too: a wind-uplift test rating isn’t a screw-spacing guide.
What colors does Fabral metal roofing come in?
Fabral lists a 22-color offering for its metal roof and wall panels. The color chart needs to match the panel and finish you’re choosing. A physical sample is the better judge beside your siding, because screen settings can change how a shade looks.
Ready to Get Started?
Our roofing specialists can help you find the right Fabral products for your project.