Metal Sales roofing, wall panels and trim are for contractors finishing homes and agricultural buildings. The range includes panels for broad surfaces and trim for the edges, valleys and wall junctions. Lay out those pieces together before the panels are cut.
Metal Sales Manufacturing Corporation makes metal roofing, wall panels and building systems. The company is headquartered in Sellersburg, Indiana. It was founded in 1963.
Plan the trim with the panels
Metal Sales white J channel is part of the trim range. Residential trim components also include hip, ridge, Z closure, gable, valley, endwall, eave and sidewall pieces. Your roof shape determines which ones belong on the material list. Mark every edge and every place the roof meets a wall before counting trim lengths.
Leaving the trim layout until the panels are cut creates avoidable fitting work. Valleys collect water, while endwall and sidewall flashing handle roof-to-wall connections. Work out the overlaps so water travels onto the next piece downhill.
Classic Rib and Pro-Panel II both support roof, wall, liner, ceiling and soffit applications, giving you two panel lines to consider across those parts of the building.
Choose the finish with its coverage in mind
Between MS Colorfast45 and ColorFit40, edge coverage favors MS Colorfast45: its 26- and 29-gauge products carry a 10-year edge warranty, compared with zero edge-warranty coverage for ColorFit40 on 29-gauge products. For a house roof, plan around the residential-home exclusion in Metal Sales’ weathertightness warranty.
Printed color representations vary, and Metal Sales offers physical sample color chips. Use a chip to compare the finish with the other exterior materials in daylight.
Match fasteners to the connection
Metal Sales specifies different fasteners for panel attachment and for sidelaps and trim. Keep those connections separate on the material takeoff. Metal Sales requires experienced, skilled contractors to install its roof and wall panels.
| Connection | Specified fastener |
|---|---|
| Panels to plywood or OSB | #14 metal woodscrew |
| Panels to dimensional lumber | #10 Woodgrip |
| Panels to steel framing | #12 TEK self-drilling screw |
| 26-gauge panel sidelaps and trims | #14 Stitch TEK screw |
| 29-gauge sidelaps and trims | #12 × 3/4-inch stitch screw |
| Image II to plywood or OSB | #8 × 1-inch truss-head fastener |
Frequently Asked Questions
What does Metal Sales make?
Metal Sales makes metal roofing, wall panels and building systems, along with trims, accessories and secondary framing. That framing supports the panels, so you’re planning the structure underneath as well as the finished surface.
What can you use Pro-Panel II for?
You can use Pro-Panel II for roof, wall, liner, ceiling and soffit applications. Classic Rib supports those same uses, so the application alone doesn’t settle which profile suits your project.
How do you attach Image II to plywood or OSB?
You need #8 × 1-inch truss-head fasteners for that connection. The fastener head matters along with its diameter and length, so a screw of the same length isn’t automatically a substitute.
What is a Metal Sales soffit panel used for?
A soffit panel closes in the underside of the roof overhang. If your roof assembly needs ventilation through the soffit, you need intake openings and a clear air path into the roof assembly. Covering the overhang with panels doesn’t by itself provide ventilation.
Ready to Get Started?
Our building materials specialists can help you find the right Metal Sales products for your project.