Guide

Tool Guides

Page 14 of 25: guides 625 to 672 of 1171.

Everything in Tools

Festool

Festool Granat 5″ Disc 180 Grit 100-Pack

The Granat 180-grit disc delivers 5-10 times the lifespan of standard aluminum oxide abrasives through its hardened aluminum oxide with ceramic grit composition. Worth it for finish contractors who need discs that'll survive modern coatings without constant replacements. The anti-clogging stearate c

Festool

Festool FSK670 Cross-Cut Rail: Portable Precision for Montana Job Sites

The Festool FSK670 transforms circular saws into portable compound miter saws with -60° to +60° angular range and automatic saw return functionality. This 26-3/8" rail connects to specific Festool saws through a quick-fastener system, creating a single unit that delivers repeatable precision cuts wi

Malco

Malco 14-Inch Andy Combo Snip: Field-Replaceable Blades Meet Montana Job Sites

The Malco 14-inch Andy Combo Snip brings lightweight aluminum construction and field-replaceable blades to contractors who cut sheet metal, vinyl siding, and thin gauge materials daily. At 14 inches overall with a 3.25-inch cutting length, it handles 20-gauge galvanized steel and 18-gauge aluminum,

Skil

Skil MAG77LT 7 1/4″ Lite Skilsaw

The MAG77LT delivers worm drive torque at just 11.5 pounds. That's 4 pounds lighter than the standard MAG77 while keeping the same 15-amp motor that framers depend on. For contractors who spend their days cutting rafters overhead or working through stacks of engineered lumber, those missing pounds m

Bear Knuckles

Bear Knuckles Black Goat Hide Gloves M293-L

Bear Knuckles' M293-L gloves solve the hand fatigue problem that flat-pattern work gloves can't touch. The patented Double Wedge™ extreme curved finger pattern matches natural hand position, cutting fatigue by letting hands work the way they're built to work, not fighting against stiff leather that

Sievert

Sievert MultiTorch Brass Torch Head

The MultiTorch Brass delivers 7,747 BTU/hr heat output with five interchangeable tip options, making it the most versatile manual torch for contractors who need one tool for multiple applications. From copper pipe soldering to paint stripping, this single torch head replaces a drawer full of special

Festool

Festool Kapex Saw Blade Set: Precision Cutting That Actually Matters

The Festool Kapex blade set (203150) delivers what most miter saw blades can't: consistent precision cuts with minimal tear-out across everything from veneered plywood to solid hardwood. At 260mm with a 2.5mm thin kerf design, these German-engineered blades cut cleaner and waste less material than

Carhartt

Carhartt Braswell Reader Safety Glasses: Bifocal Protection That Actually Works

The Carhartt Braswell (model CHB1110TR15) solves a real jobsite problem, switching between readers and safety glasses, with a +1.5 diopter bifocal design in ANSI Z87.1+ certified protection. These half-frame safety glasses deliver what contractors need: clear vision for detail work without sacrifi

Fein

Fein OTA 1-3/4" E-Cut Universal Bi-Metal Blade

The Fein OTA 1-3/4" E-Cut Universal Bi-Metal Blade is a professional-grade oscillating tool accessory designed to cut sheet metal up to 5/64" (2mm), aluminum profiles, copper pipes, wood with nails, and plastics, all with a single blade. The bi-metal construction combines high-speed steel teeth wit

Bosch

Bosch X-LOCK 4-1/2″ Flap Disc: Tool-Free Disc Changes for Metal Grinding

The X-LOCK quick-change disc attachment system allows for tool-free, up to 5x faster changes. That's the headline feature that sets this Bosch flap disc apart from standard arbor-mounted discs. For contractors grinding metal in Montana's short construction season, faster disc changes mean more bill

Milwaukee

Milwaukee M18 PACKOUT Radio: The Jobsite Sound System That Charges Your Batteries

The Milwaukee M18 PACKOUT Radio (model 2950-20) combines a 10-speaker sound system with integrated M18 battery charging and full PACKOUT compatibility. This radio delivers 360-degree sound through its 2.1 speaker design while charging any M18 battery when plugged into AC power. At around 18 pounds,

Pony

Pony 1/2″ Black Pipe Clamp

The Pony 1/2″ Black Pipe Clamp delivers 1,000 pounds of clamping force through a multiple-disc clutch system that actually works. At 2.4 lbs per set, this fixture transforms any length of 1/2-inch black pipe into a reliable clamp for small-to-medium woodworking projects.

Kreg

Kreg Wood Blue-Kote Screw Kit (SK03B) Review

The Blue-Kote coating offers 400% greater rust resistance than standard zinc-plated screws. That spec alone makes this kit worth considering for Montana's freeze-thaw cycles. The SK03B packs 450 screws across four sizes in a portable case, hitting the sweet spot between stainless steel performance

Husqvarna

Husqvarna 580BTS III Pro Backpack Blower

Professional contractors need maximum blowing power for daily use on large properties, and the Husqvarna 580BTS III delivers 1,000 CFM airflow in pipe with 220 mph air speed. The 580BTS III is typically ranked as the #2 strongest backpack blower on the market, trailing slightly behind the Echo PB-90

Milwaukee

Milwaukee M12 REDLITHIUM XC 4.0Ah Battery: Extended Runtime for Montana's Extended Workdays

The Milwaukee M12 REDLITHIUM XC 4.0Ah battery delivers up to 2x more runtime than standard M12 batteries, critical when you're 45 minutes from the nearest hardware store and forgot the backup pack. At 4.0 amp-hours with approximately 20% more peak power than standard lithium-ion batteries, this ext

Stabila

Stabila Dark Shadow Type 80AS-2 24″/48″ Level Set with Case

The Dark Shadow edition features a matte anthracite coating and dark color scheme compared to the standard yellow glossy finish. That's the first thing contractors notice. But the real question is whether this limited-edition finish delivers measurable advantages over standard Stabila levels, or if

Milwaukee

Milwaukee M18 FUEL Hammer Drill & Impact Driver Combo Kit

Worth it for contractors who need the most torque in the smallest package. The hammer drill delivers 1,400 in-lbs of torque in a 6.9-inch body, while the impact driver cranks out 2,000 in-lbs at just 4.47 inches long. AutoStop Control Mode prevents over-rotation in bind-up situations, the kind of s

Kinco

Kinco 90HK-M Deerskin Thermal Glove: Premium Winter Work Protection

Worth it for contractors who need dexterity in cold conditions. The full-grain deerskin molds quickly to your grip, the Heatkeep® thermal insulation retains heat while wicking moisture, and the glove handles everything from equipment operation to detail work. At 4.3 to 4.7 stars

Malco

Malco TurboShear: Drill-Powered Metal Cutting That Actually Works

The TurboShear platform transforms your existing drill into a metal-cutting powerhouse, with the TSHD (Heavy-Duty) model handling 18-gauge mild steel and the standard TS1 tackling 20-gauge material. At the core of both models is a patented telescoping drill-clamp (Patent #9,649,702) that grabs onto

QEP

QEP 14″ Replacement Blade 21000Q

The QEP 14″ Replacement Blade delivers exactly what professional flooring contractors need, a fresh cutting edge that maintains peak scraping performance without replacing the entire tool. At 14 inches (350mm) wide with premium flexible carbon steel construction, this blade handles the demanding fl

LIFT Safety

LIFT Safety DAX Carbon Fiber Full Brim Hard Hat: Lightweight Protection That Actually Lasts

The LIFT Safety DAX Carbon Fiber Full Brim Hard Hat delivers what contractors need most, all-day wearability without sacrificing protection. At 1.02-1.25 pounds total weight with suspension, it's measurably lighter than standard hard hats while maintaining ANSI Z89.1-2014 Type 1 Class C certification. The 350°F heat rat

Boss

Boss Large Black Nitrile 4 Mil Disposable Gloves (100-Pack)

Boss 4 mil nitrile gloves deliver the durability contractors actually need without the medical-grade markup. At 4 mil palm thickness, these gloves handle automotive chemicals, paint solvents, and general construction abuse better than the thin 2-3 mil versions that tear when you look at them wrong.

Makita

Makita Outdoor Adventure 18V LXT Power Source (ADADP05)

The ADADP05 transforms any Makita 18V LXT battery into a portable USB charging station, solving a real problem contractors face daily, keeping phones and tablets charged at remote jobsites. At 0.4 lbs, it's light enough to forget it's clipped to your belt until you need it.

Hitachi

Hitachi NT50AE2 18-Gauge Brad Nailer

Worth it for finish carpenters who need a featherweight nailer that doesn't sacrifice power. At 2.2 lbs, the NT50AE2 reduces arm fatigue during full days of crown molding and cabinet trim. The selective actuation switch lets you toggle between bump fire for production work and sequential for precisi

DAX

DAX Carbon Fiber Hard Hat Full Brim

The DAX Carbon Fiber Full Brim Hard Hat delivers what matters most: ultralight weight without sacrificing protection. At 315-415g shell weight, it's lighter than any traditional hard hat that meets the same impact standards. The carbon fiber construction handles heat loads up to 350°F, and the overs

Milwaukee

Milwaukee 9" x 24 TPI TORCH Reciprocating Saw Blade 5-Pack

The Milwaukee 9" x 24 TPI TORCH reciprocating saw blade (48-00-5790) delivers what metal-cutting contractors need most, blades that don't snap at the tang when you're halfway through a cut. At 9 inches long with 24 teeth per inch, this bi-metal blade handles the thin metal work that fills most co

Milwaukee

Milwaukee M12 Lithium-Ion Battery 12V: Seven Ways to Power Your Cordless Platform

Milwaukee's M12 REDLITHIUM battery system powers over 125 tools with seven capacity options from 1.5 to 6.0 Ah. The platform delivers what Montana contractors need most: operation below 0°F/-18°C and multiple runtime choices for different budgets and applications.

Milwaukee

Milwaukee FREEFLEX XL Black Midweight Pullover Hooded Sweatshirt

The Milwaukee FREEFLEX hoodie delivers drop-shoulder seams for reduced wear and reinforced pocket seams that solve real problems on Montana job sites. It targets contractors who need trade-focused design features beyond what standard hoodies offer.

Husqvarna

Husqvarna C83S 3/8″ .050″ 20″ Saw Chain

The C83S cuts sharpening time in half compared to standard chains. The C83S skip-tooth design has fewer cutters (every other link is a cutter), which reduces the power needed to drive the chain through the wood, maintains higher RPM on long bars, and cuts sharpening time in half. For contractors run

Exchange-A-Blade

Exchange-A-Blade EAB 10″ x 60T Melamine Blade

The EAB 10″ x 60T tackles the cabinet maker's worst enemy: melamine chip-out. 60 teeth with TCG (Triple Chip Grind) configuration delivers what cheaper blades can't: clean edges on both sides of laminated panels. At 3.0 mm kerf width, it's thick enough to stay flat through long rips without the wobble that ruins finish quality.

Mayhew

Mayhew Pro Pin Punch 1/4″ x 6″

The Mayhew Pro Pin Punch delivers S2 tool steel construction with 58-62 HRC hardness, tough enough to survive Montana's temperature swings without deforming. At 1/4 inch tip diameter and 6 inches overall length, it's sized right for the roll pin removal that every contractor faces on equipment main

StealthMounts

StealthMounts M12 Tool Mounts: The Twist-Lock Solution for Milwaukee's Compact Platform

StealthMounts' M12 tool mounts solve the mobile storage problem that basic hooks can't touch. The twist-and-lock mechanism specific to the M12 line provides a secure 'click' when locking that prevents tools from falling during transport, unlike simple hooks or clips. Over 500 positive reviews across

Rotozip

Rotozip X-Bit Multipurpose Cutting Bits

Rotozip's X-Bit multipurpose line delivers 3X longer life and 2X faster cutting than conventional bits, built specifically for contractors who hit mixed materials that destroy standard drywall bits. The thicker 5/32" shank compared to standard 1/8" bits means fewer snapped bits when you unexpectedly

Off

Off 1810 6oz Aerosol: 15% DEET Protection for Montana's Working Outdoors

Off's 1810 aerosol delivers protection with 15% DEET, strong enough for 5-hour coverage without the chemical overload of 25%+ formulations. At 177 ml in an aerosol can, it's sized for truck storage and quick application between job sites.

Dremel

Dremel XPR Professional Rotary Tool Line

The Dremel XPR represents a discontinued professional-grade rotary tool line featuring permanent magnet motors and a unique dovetail attachment system. These tools delivered 1.6 Amps and 140W power input with variable speeds from 5,000 to 35,000 RPM, specifications that put them solidly in professi

Boss

Boss General Grade Nitrile Gloves and ANSI Rainwear

Boss makes General Grade disposable nitrile gloves and PVC rain suits that actually hold up to jobsite abuse. Their 4 mil nitrile gloves handle automotive chemicals without tearing, and their rain gear meets ANSI visibility standards while staying together through a full season of Montana weather.

Malco

Malco HD Turbo Shear TSHD

The Malco HD Turbo Shear TSHD transforms any standard drill into a precision metal cutting powerhouse, handling up to 18-gauge mild steel with its 360° rotating head design. At 18-gauge mild steel capacity (0.048"), 20-gauge spiral duct (0.040"), 14-gauge aluminum (0.060"), and 0.100" copper capabil

Bora

Bora NGX 50" Aluminum Clamp Edge Guide

The Bora NGX 50" delivers track-saw accuracy without track-saw investment, 150-160 lbs of clamping force with one-handed operation that'll change how you break down sheet goods. Skip it if you're content with clamping a level to plywood. This is for contractors who understand that straight cuts sav

Pony

Pony 3" Spring Clamp Review: 44 lbs of One-Handed Clamping Power

The Pony 3" Spring Clamp packs 44 lbs of holding capacity into a 9-inch tool that weighs just 0.645 lbs. For contractors who need quick, reliable clamping without fumbling with screws or handles, this spring clamp delivers instant grip with protected tips that won't mar finished surfaces.

Husqvarna

Husqvarna C83S 24" Saw Chain 3/8" .050"

The Husqvarna C83S delivers professional-grade performance through skip-tooth design that excels on longer bars. Fewer cutters allow for better chip clearance and lower power demand on longer bars, making this chain the right choice for contractors running 24" to 32" bars through Montana's commercia

Viking

Viking Rain Jacket Green X-Large: Heavy-Duty Chemical Protection for Montana's Industrial Work

The Viking 7125J-XL rain jacket delivers 0.75mm PVC protection with 9 oz. cotton twill backing, built for Montana's mining operations, agricultural chemical handling, and petroleum processing facilities. At 4 pounds and 33 inches long, this isn't recreational rain gear. It's industrial-grade protec

Freud

Freud 12x96T Crosscut Thin Kerf Blade

Worth it for contractors who need glass-smooth crosscuts without bogging down their saws. The 0.091-inch kerf requires less power and reduces material waste, ideal for underpowered saws, while 96 teeth with Hi-ATB grind deliver the finish quality cabinet shops demand. At 4.7 out of 5 stars based on

Crescent

Crescent Command Control Series Tape Measures

The Crescent Lufkin Command Control Series 1-3/16 In. x 25 Ft. Tape Measure with Black Blade targets contractors who need better visibility and safer operation than standard tape measures deliver. The defining feature is NITE EYE technology with a matte black nylon-coated blade that cuts glare in br

Empire

Empire 8x12 Steel Carpenter Square: The Compact Workhorse

Worth it for contractors who need a portable square that'll handle quick layout work without babying it. The 8 in. x 12 in. size paired with 1/16 in. thick steel and protective epoxy coating creates a tool that survives real jobsite conditions while fitting where larger squares won't go.

EAB

EAB OTA PRO Wood/Metal Blade 1.25″ 5-Pack

Worth it for contractors who need oscillating blades that last 4x longer than previous generations. Universal fit works on 13+ major brands including Fein, Dremel, DeWalt, Milwaukee, and Makita.

Fein

Fein MultiMaster Oscillating Multi-Tools: The QuickIN Advantage

Fein's MultiMaster oscillating multi-tools deliver what contractors actually need: blade changes in under 3 seconds and vibration control that lets you work all day. The QuickIN system combined with StarlockPlus mounting creates the most efficient power transfer in the category.

Chilly Grip

Chilly Grip Rubber Palm Dip Glove Large

Heavyweight brushed/napped acrylic thermal knit liner meets heavy-duty textured latex rubber palm coating. That's what makes these gloves worth considering for Montana's shoulder seasons. At 0.4 lbs per pair, they're built for work, not show.

Empire

Empire Brass Stair Gauge 2-Pack

The Empire Brass Stair Gauge 2-Pack (model 105) consists of two solid brass gauges that clamp onto framing squares for marking consistent angles on stairs and rafters. At 0.15 pounds for the pair, these 3/4-inch diameter gauges fit standard framing squares from Empire and most other brands. With a 4