Ready to Get Started?
Our tool specialists can help you find the right Exchange-A-Blade products for your project.
Browse › Tools › Exchange-A-Blade
Exchange-A-Blade EAB 10″ x 40T Pro Cabinet Blade
Tools Exchange-A-BladeThe Exchange-A-Blade 10-inch Pro Cabinet Blade puts C4 micro-grain carbide precision in the hands of Montana contractors who need clean cuts in hardwoods, plywood, and engineered lumber.
This 40-tooth ATB configuration blade runs a full 3.0mm kerf, not one of those thin-kerf blades that deflect in dense hardwoods. The tension rings keep the plate flat when heat builds up during long rips through Western Larch or Douglas Fir.
Technical Specifications
| Specification | Value | Source |
|---|---|---|
| Diameter | 10 inches (254mm) | manufacturer |
| Tooth Count | 40 | manufacturer |
| Tooth Configuration | Alternating Top Bevel (ATB) | manufacturer |
| Hook Angle | 15 degrees | manufacturer |
| Arbor Size | 5/8 inch | manufacturer |
| Kerf Width | 3.0mm | manufacturer |
| Maximum Speed | 7,500 RPM | manufacturer |
| Weight | 1.7 lbs | manufacturer |
The blade features hardened steel construction with tension rings for stability, and the carbide tips come precision sharpened on top, face, and sides. That three-way sharpening matters when you’re cutting expensive hardwoods where tear-out costs money.
Performance in Cabinet Work
The 40-tooth ATB configuration with 15-degree hook angle delivers what cabinet makers need: splinter-free cuts in veneered plywood and clean edges on solid hardwood. Compatible materials include hardwoods, softwoods, plywood, particle board, veneers, and engineered lumber.
That 3.0mm full kerf provides the stability needed when cutting Montana hardwoods. Compared to Diablo’s ultra-thin kerf blades, EAB’s thicker plate resists deflection. Less blade wander means straighter cuts, especially important when you’re edge-gluing boards for tabletops or cabinet doors.
The tension rings maintain blade flatness under heat and stress. During those long rips through 8/4 stock, cheaper blades start to cup and wobble. The EAB stays flat, cutting true from the first board to the last.
Frequently Asked Questions
What table saws work with this blade? Standard 10-inch table saws and miter saws with a 5/8-inch arbor. That covers virtually every cabinet shop saw from contractor portables to 3HP cabinet saws.
What’s the actual warranty coverage? EAB provides an Unconditional Satisfaction Guarantee, guaranteeing products meet or exceed original factory specifications.