Ready to Get Started?
Our tool specialists can help you find the right EAB products for your project.
Browse › Tools › EAB
EAB 7-1/4″ x 40T Finish Green Blade
Tools EAB Worth it for contractors who care about eco-friendly manufacturing. The blade delivers general-grade performance from EAB, built from recycled tungsten carbide.
Skip it if you need professional-grade carbide for heavy daily use. This green blade uses C2 carbide intended for light-to-medium duty work, while EAB’s blue and orange lines feature thicker plates and higher-grade carbide for demanding jobsite conditions.
Technical Specifications and Compatibility
The blade runs a standard 7-1/4” diameter with a 5/8” DKO (diamond knockout) arbor, fitting every major circular saw on the market. Compatible with DeWalt, Makita, Bosch, and Milwaukee saws using that arbor size.
| Specification | Value |
|---|---|
| Diameter | 7-1/4” (184 mm) |
| Tooth Count | 40 |
| Tooth Geometry | ATB (Alternate Top Bevel) |
| Arbor | 5/8” DKO (13.0 mm) |
| Kerf | 1.8 mm |
| Hook Angle | 15° |
| Max RPM | 8,000 |
The 40-tooth ATB configuration with a 15° hook angle puts this squarely in finish blade territory. That 1.8mm thin kerf reduces material waste and cuts easier through sheet goods: exactly what you want for cabinet work and trim.
C2 micro-grain carbide teeth sit on an HRC-45 hardened steel plate. That’s decent steel hardness for a general-grade blade, though not the premium you’d find in contractor-grade options. Expansion slots handle heat buildup and reduce vibration: standard features that work as advertised.
Environmental Design
EAB builds these with recycled tungsten carbide teeth and chromium-free manufacturing. The entire blade is fully recyclable when it’s finally done. California Proposition 65 warning applies, but that’s standard for any carbide blade.
For Montana contractors dealing with increasing environmental requirements on commercial projects, having recyclable blades with documented eco-friendly manufacturing might check boxes on LEED or sustainability scorecards.
Performance and Applications
EAB positions this for plywood, particle board, solid lumber, MDF, melamine, and laminates. Use cases include finishing cuts, fine cross-cutting, ripping, trim fabrication, and cabinetry.
The “general-grade” designation means light-to-medium duty DIY use. Translation: weekend warriors and contractors doing occasional finish work, not the crew framing houses all day. Professional feedback emphasizes smooth, melt-free cuts on melamine and laminates, with the 40-tooth configuration providing the right balance between cut quality and speed.
That thin 1.8mm kerf shines on sheet goods. Less resistance means cleaner cuts with less chip-out on veneered plywood and melamine: critical when you’re cutting expensive cabinet materials where every edge shows.
Frequently Asked Questions
Q: What’s the difference between EAB’s green, blue, and orange blades?
Green blades use C2 carbide for general-grade, light-to-medium duty work. Blue and orange blades feature professional or heavy-duty grades with C3 or higher carbide and thicker plates for longer life. Green blades prioritize eco-friendliness and recyclability.
Q: Is this blade suitable for pressure-treated lumber?
The blade handles solid lumber (both softwood and hardwood), but the C2 carbide grade suggests limiting use on highly abrasive materials like pressure-treated lumber. Save this blade for interior trim and cabinet work where it excels.
Q: What’s the actual lifespan compared to premium blades?
As a general-grade blade with C2 carbide, expect shorter life than professional-grade options with C3 or higher carbide.