Guide

Siding Guides

Page 2 of 9: guides 49 to 96 of 388.

Everything in Siding

RISE

RISE Lap Siding 3/8″ x 8.25″ x 20' (7″ Reveal)

RISE lap siding delivers the only 20-foot boards in the market, made from 94% recycled synthetic fibers that can handle ground contact where other sidings fail. At 3/8" thick with an 8.25" total width and 7" reveal, these boards eliminate the seam problem that plagues standard 12- and 16-foot siding

Royal Building Products

Royal Building Products Celect Cellular Composite Siding

Royal Building Products' Celect siding offers something most composite sidings can't touch: a gravity-lock system that eliminates caulking at joints while standing up to 210+ mph winds. No caulking or flashing required at joints; panels interlock using a gravity-lock system. Designed to move freely within

Epic Steel

Epic Steel Board & Batten Panel - 24 Gauge Ultra Low Gloss Colors

Epic Steel's Board & Batten panel delivers modern architectural aesthetics with industrial-grade performance: combining the traditional vertical siding look with 24-gauge steel durability and specialized low-gloss finishes. The hidden fastener system eliminates visible screws while the heavy-gauge

Huber Engineered Woods

Huber ZIP System VP Flashing Tape (3-3/4" x 90')

ZIP System VP Flashing Tape solves the moisture trap problem that standard flashing tapes can't touch. 3 perms of vapor transmission, breathable enough to prevent condensation buildup while still blocking wind-driven rain. At 12 mil thickness versus standard tape, it delivers the same bulletproof s

Louisiana-Pacific

Louisiana-Pacific LP SmartSide Soffit 3/8″ x 16″ - 16' Vented

LP SmartSide Vented Soffit solves the tedious metal vent installation problem while delivering 10 square inches of net free air per linear foot. The precisely cut vents eliminate the need for hand-installed metal vents, saving significant labor on every soffit run. At 27 pounds per 16-foot panel, it

Trusscore

Trusscore SlatWall Top Cap Trim

Trusscore SlatWall Top Cap Trim finishes the top edge of slatwall installations with a purpose beyond aesthetics. The top cap slides onto the top edge of the SlatWall panels after they are mounted, hiding the top row of fasteners. Its primary strength lies in its ability to prevent dust and dirt acc

James Hardie

HardieTrim Outside Corner Timber Bark ColorPlus

James Hardie's fiber-cement corner trim delivers factory-finished precision where siding meets at outside corners. The 10-foot lengths come in 3.5 and 5.5 inch face widths, matching standard lap siding profiles while eliminating the need for on-site painting through ColorPlus technology.

Westlake Royal Building Products

Celect Canvas Board & Batten 11″ Siding

Celect Canvas Board & Batten 11″ delivers >210 mph wind resistance in a lightweight cellular composite panel that contractors can paint to match any color scheme. At ~9.3 lbs per panel versus 12-15 lbs for fiber cement alternatives, crews haul less weight up scaffolding while gaining superior moistu

Fabral

Fabral 2½" Corrugated: The Workhorse Panel That Does It All

This 29-gauge corrugated panel offers exceptional versatility across roofing, siding, and interior applications with Grade 80 steel construction. At 0.65 lbs/sqft, it's light enough for easy handling but tough enough for Montana's demanding climate. The panel delivers real value for contractors who

Chelsea Building Products

Chelsea Building Products Everlast Lap Siding in Storm Grey

Chelsea Building Products' Everlast Lap Siding solves the moisture trap problem that traditional siding can't touch. The cellular PVC core is virtually impervious to moisture, preventing rot, swelling, and delamination. At 1.3-1.5 lbs per square foot versus heavier fiber cement options, crews haul l

Epic Steel

Epic Steel 24 Gauge Soffit - Charcoal Gray (Stock Color)

Epic Steel's 24 gauge soffit panels solve a fundamental problem Montana contractors face: finding soffit material that won't buckle under snow loads or tear loose in chinook winds. At 1.00 lb/sq ft and 50,000 psi yield strength Grade D steel, these panels pack 33% more material than standard 26 gaug

CertainTeed

RISE 3/8" Lap Siding: The Only Hard Siding That Touches the Ground

RISE 3/8" Lap Siding allows for incidental ground contact, a capability no other hard siding can match. While James Hardie requires 2-6 inches clearance and LP SmartSide is susceptible to moisture damage near ground, RISE solves the eternal siding headache of foundation transitions and deck skirtin

Westlake Royal Building Products

Westlake Royal Building Products Versetta Stone Pier Cap

The Versetta Stone Pier Cap solves a problem that's plagued stone veneer installers for decades: how to finish column tops without wrestling with mortar in Montana's unpredictable weather. This 22-inch square fiber-reinforced concrete cap delivers a finished stone look through mechanical fastening

Westlake Royal Building Products

Westlake Royal Building Products Versetta Stone Accessory Box (Receptacle/Light Box)

Lightweight fiber-reinforced concrete accessory boxes that solve the plastic mounting block problem. At roughly 1-5 pounds per unit, these boxes match Versetta Stone panels exactly, same texture, same colors, same concrete construction. No more cheap plastic boxes ruining the look of manufactured s

Woodtone

Woodtone FireGuard™ Fascia and Trim

FireGuard delivers Class A fire protection for real wood trim in wildfire-prone areas. The intumescent coating expands when exposed to heat or flame, creating a protective barrier that keeps flame spread below 25, the strictest rating for WUI construction. Contractors get the workability of real SP

Westlake Royal Building Products

TruExterior Trim: The Poly-Ash Platform That Actually Delivers

TruExterior Trim earns its reputation through revolutionary poly-ash material that offers real workability similar to traditional wood while eliminating moisture-related problems, movement, rot, and termite attacks. After three decades of watching trim fail in Montana weather, this produ

Allura

Allura Panel Siding 5/16″ x 4' x 9' 8″ OC Groove

Allura's 5/16" fiber cement panels with 8" on-center grooves deliver the cedar texture contractors want with the fire resistance Montana's wildfire zones demand. At 20-30% less cost than James Hardie with the same 30-year warranty, these panels make sense for builders who need proven performance wit

TimberTech

TimberTech Advanced PVC Cladding - French White Oak

TimberTech Advanced PVC Cladding in French White Oak delivers Class A fire rating, 100% moisture resistance, and stays 30°F cooler than competitors while maintaining authentic wood aesthetics. For contractors working Montana's Wildland-Urban Interface zones, this advanced PVC cladding meets WUI compliance re

Trusscore

Trusscore Wall&CeilingBoard: The 100-Year Alternative to Drywall

Trusscore Wall&CeilingBoard delivers a waterproof, impact-resistant panel system that installs 4x faster than drywall. The 8-foot white panels (model TC1608) feature an internal truss structure that provides rigidity while staying lighter than drywall. With a Class A fire rating, 20-year warranty ex

HardiePlank

HardiePlank ColorPlus: Factory-Applied Finish Technology for Montana's Climate

HardiePlank ColorPlus solves the field-painting problem that plague fiber cement installations. The ColorPlus Technology involves a multi-step baking process that ensures consistent, long-lasting color resistant to fading, cracking, and peeling, even in harsh weather conditions. Unlike primed Hardie

Edco

Edco Entex Soffit & Fascia: The Cool Chemistry Finish That Actually Works

Edco's Entex finishing system brings genuine innovation to soffit and fascia, proprietary Cool Chemistry paint technology that reflects heat, resists fade for 35 years, and comes in three distinct ventilation configurations from zero airflow to double the standard. Skip it if you're shopping purely

Quality Edge

Quality Edge TruLine HP Double 5″ Soffit (D5SS, D5VS)

Quality Edge's TruLine HP Double 5″ Soffit delivers 12.0 sq. in. per lineal foot of ventilation in the vented model (D5VS), the highest NFA rating in the aluminum soffit market. The 0.019 inches (HP-Series / Heavy Gauge) aluminum construction provides measurable rigidity advantages over standard 0.

Woodtone

Woodtone Product Lines: Five Solutions for Different Building Challenges

Woodtone doesn't sell just one type of pre-finished siding. They've built five distinct product lines, each targeting specific performance requirements and jobsite realities. The company offers a broad range of products that emphasize beauty, craftsmanship, and durability, with industry-leading warr

LP

LP SmartTrim: Engineered Wood That Works Like Wood Should

LP SmartTrim sits at the intersection of old-school workability and modern engineering. Treated with SmartGuard process for superior protection against weather, fungal decay and termites, it delivers what contractors actually need, trim that cuts clean, holds paint, and doesn't rot.

Quality Edge

Quality Edge TruLine® HP Soffit

Quality Edge TruLine® HP Soffit delivers the industry's highest airflow rating at up to 19.6 NFA per lineal foot, solving the moisture trap problem that plagues Montana roofs. The bridge lance technology creates deeper, longer airflow paths that actually move air through attics instead of letting it

Allura

Allura Trim 7/16″ - Reversible Cedar/Smooth Board

Allura's reversible fiber cement trim board offers contractors dual texture options (cedar/smooth) in a single board with Class A fire rating (Flame Spread Index 0) and 15-year warranty. At 7/16 inch thickness, this trim solves the inventory problem contractors face when matching different siding pr

Westlake Royal Building Products

Westlake Royal Building Products Versetta Stone Starter Strip

Westlake Royal Building Products' Versetta Stone Starter Strip is a 10-foot vinyl foundation accessory that creates the critical first connection point for panelized stone veneer systems. The starter strip provides both structural support and moisture management at the foundation line, featuring bui

Edco

Edco Perspectives Deep Ocean Siding: 26-Gauge Steel with Built-In Rainscreen

Edco Perspectives delivers 26-gauge steel siding with integrated ventilation that functions as a rainscreen system without requiring additional products. The Class 4 impact rating and 160 mph wind uplift rating address Montana's hail corridors and chinook wind events directly. At 70 lbs per carton c

NCP Industries

NCP Industries ADORN Stone ECO2LUXE Premier Series: Carbon-Capturing Stone Veneer That Changes the Game

This mortarless stone veneer permanently stores 2.5 lbs of CO2 per square foot, equivalent to planting one tree for every 21 sq ft installed. For Montana contractors serving climate-conscious clients, the ECO2LUXE Premier Series delivers measurable environmental impact without sacrificing installat

AdvanTech

AdvanTech X-Factor: Built-in Moisture Protection That Actually Works

AdvanTech X-Factor elevates subflooring with a built-in yellow moisture-shedding top layer that eliminates the need for additional vapor barriers while providing an easy-clean, marker-friendly surface. The yellow coating is the defining feature that separates X-Factor from standard AdvanTech, transf

Edco

Edco Perspectives 6″ Shiplap Siding - Iron Gray

Edco Perspectives 6″ Shiplap in Iron Gray delivers a modern aesthetic with serious performance credentials, highly regarded for its ease of installation due to the VersaLok system. This 26-gauge steel siding brings Class 4 impact resistance and 160 mph wind ratings to residential and commercial pro

RISE

RISE Trim: The 13'4" Solution for Fewer Joints

RISE Trim delivers what matters: 94% recycled content, ground contact rating, and a 13'4" length that matches 10 studs at 16" on-center. The 5/4 x 8 inch boards come in textured wood-grain or smooth finishes, either factory-finished (ColorRISE) or primed.

AZEK

AZEK Alpine Collection Mission Oak Beadboard

The AZEK Alpine Collection Mission Oak beadboard from AZEK Exteriors delivers 18-foot continuous PVC planks with realistic wood-tone laminate, eliminating multiple seams while surviving Montana's temperature extremes. The high-performance cellular PVC core wrapped in exterior-grade laminate creates beadboard th

Woodtone

Woodtone Cortanium™ Trim: Lifetime Protection with Real Wood Performance

Woodtone Cortanium™ Trim delivers lifetime protection against rot, decay, and insect damage while keeping the authentic look and workability of solid wood. The secret? TRU-CORE water-based penetrating system that improves dimensional stability throughout the entire board, not just a surface treatme

RISE

RISE ColoRISE Factory Finished 5/4″ x 6″ x 13' 4″ Trim

RISE ColoRISE trim packs 94% recycled content into a board that defies freeze/thaw damage and resists rot: two critical qualities for Montana's temperature swings. The 13' 4" length matches 16" on-center stud spacing, cutting down on seams compared to standard 12-foot boards. For contractors tired

Allura

Allura Panel Siding 5/16″ x 4' x 10' Smooth

Allura's 5/16-inch smooth fiber-cement panels deliver 40 square feet of coverage per sheet with Class A fire resistance and proven freeze-thaw durability. At 98.19 pounds per panel and 2.45 pounds per square foot, these 4×10 panels offer the dimensional stability Montana contractors need without the

Everlast

Everlast Premium Color-Matched 3 1/2″ Lineal

Everlast's color-matched trim system delivers what matters for Montana contractors: dimensional stability in extreme temperature swings and the EZNail hammer guide that makes one-person installation actually work. At 3-1/2 inches wide by 12'6" long, this trim handles window and door surrounds, outsi

NCP Industries

NCP Industries ADORN Ridgestone Series: Mortarless Stone Veneer That Actually Makes Sense

NCP Industries' ADORN Ridgestone Series is a mortarless stone veneer system that installs with screws instead of mortar, weighs 30% less than traditional stone, and incorporates CO2-absorbing technology into the concrete mix. For Montana contractors dealing with short building seasons and weight res

Westlake Royal Building Products

Celect Canvas Horizontal Lap 7″ Cellular Composite Siding

Celect Canvas Horizontal Lap 7″ is a paintable cellular PVC siding that solves the moisture trap problem traditional siding creates while offering double the insulation value of standard products. R-value is approximately double that of standard siding materials. Built with Patented I

NCP Industries

NCP Industries ADORN Ledgestone Series

ADORN Ledgestone delivers 3-4 square feet of coverage per box with panels measuring 23.5" x 6" x 1.75". That's real efficiency when you're pricing out a job. At 5.5 lbs per panel and 52-55 lbs per box, your crew can handle these without the back strain that comes with natural stone. The mortarless,

Epic Steel

Epic Steel 7/8" Corrugated Panel - 24 Gauge Dark Bronze (Ultra Low Gloss)

The 7/8" Corrugated profile delivers what Montana contractors need most, 50,000 psi minimum yield strength in a panel that handles both roofing and siding duty. At 24 gauge thickness, this corrugated panel brings legitimate structural muscle to residential and light commercial projects where thinne

LP SmartSide

LP SmartSide Cedar Texture Shake Siding (3/8″ x 12″ x 4′)

LP SmartSide's engineered wood shake siding at 4.5 lbs per panel changes the game for contractors installing shake accents on gables and dormers. 45% lighter than fiber cement, this product eliminates the shoulder fatigue that comes with hauling heavy panels up ladders all day. The Cedar Texture finish

Versetta Stone

Versetta Stone Flat Panel Siding: Mortarless Stone That Actually Works

Skip the mortar. Skip the lath. Skip the masonry crew. Versetta Stone installs like siding with just screws or nails, and that changes everything about stone veneer economics.

Allura

Allura Spectrum Pre-Finished Panel Siding

Allura Spectrum Pre-Finished Panel Siding delivers factory-applied, 5-sided paint coverage on fiber cement panels that handle Montana's temperature extremes. At 2.3 pounds per square foot and available in 8', 9', 10', and 12' lengths, these panels eliminate field painting while offering Class A fire

Allura

Allura Shake Select Primed: Fiber Cement Shake Panels for Montana's Climate Extremes

Allura Shake Select Primed delivers authentic cedar shake aesthetics in 5/16" fiber cement panels with Class A fire rating and hurricane-force wind resistance. The 16" x 48" panels come factory primed for field painting, solving the labor problem contractors face when installing individual shakes in

Versetta Stone

Versetta Stone Universal Corner - Ledgestone

Versetta Stone's mechanical fastening system changes the stone veneer game. No mortar, no mason, no waiting for perfect weather. The integrated G-90 galvanized steel nail strip lets contractors install stone veneer with the same tools and skills they use for fiber cement siding.

Louisiana-Pacific

Louisiana-Pacific LP SmartSide 5/4 x 4 x 10' Primed Trim

LP SmartSide 5/4 x 4 primed trim solves a real contractor problem, wrapping structural posts without the headaches of fiber cement or the maintenance demands of natural wood. Contractors appreciate that it handles similarly to natural wood but with improved durability. At 21 pounds per 10-foot piece with 1

RISE

RISE 5/4 x 8 inch x 13'4" Trim

RISE trim brings 94% recycled content to exterior applications where moisture resistance matters most. The 13-foot-4-inch length matches exactly 10 studs at 16-inch on-center spacing, a dimension that reduces waste and speeds installation compared to standard 10 or 12-foot trim boards.