Brand
Brand Overview Decking & Railing

Woodgrain

Woodgrain Moulding and Doors: Finished Elegance, Satin Coat and Stile-and-Rail Wood Doors Woodgrain

Woodgrain moulding and doors are for trimming out rooms with base, casing and crown, and for hanging stile-and-rail wood doors inside or out. The trim comes raw, primed or fully finished, so a homeowner or a trim carpenter can buy it in the state that fits the time and skill on hand.

Woodgrain is a family-owned maker of moulding, millwork, doors and windows with corporate offices in Fruitland, Idaho, a Northwest company making trim for the kind of houses built out here. It was founded in Utah in 1954 on the idea of turning reject and shop-cut wood into fingerjoint moulding, and it still runs three generations deep. Labels that once read “by Woodgrain Millwork” now read “by Woodgrain,” and both come from the same company.

Raw, primed or finished: pick the trim by the work left to do

For painted trim, buy fingerjoint lineal. Short clear pieces are glued into long, straight lengths that stay put on the wall, and paint hides the joints. For stain or a clear coat, buy solid lineal, because stain soaks into each glued block differently and every joint shows. Staining fingerjoint is the mistake that comes back most often, and once it’s on the wall the only fix is paint.

Satin Coat is primed on all four sides, so the back and edges that sit against drywall and subfloor are sealed along with the face. That’s the first coat done before the trim is cut. Fill the nail holes, caulk the joints, scuff-sand the primer and put on two topcoats.

Finished Elegance needs no painting at all, so the room is done when the last nail goes in. Cut it with a sharp fine-tooth blade so the finish stays clean at the miter, carry it by the edges, and fill nail holes with color-matched putty. Prefinish Ash is the prefinished choice when you want ash grain showing instead of a painted face. On either line, finish with a touch-up marker on every cut end that shows.

BlockShop and Flexgrain for miters and curves

BlockShop is an assortment of corner and divider blocks that forms a no-miter system, and it works with any traditional moulding and with DecraMold, Woodgrain’s decorative moulding line. Every cut becomes a square cut butted into a block, which takes the hardest part of trim work off a first-timer’s job. Set the blocks first, plumb and level, then measure and cut the casing to fit between them.

Flexgrain is Woodgrain’s flexible moulding, for curved walls and arched openings where a rigid stick would crack. Dry-fit the full run before any glue goes on.

Paneled wood door set in wood siding

Woodgrain doors: interior openings and covered entries

Woodgrain Doors builds hardwood and softwood stile-and-rail doors for interior and exterior openings. Interior openings suit them best: steady temperature, no sun, no rain.

An exterior Woodgrain door has to be at least 1 3/4 inches thick and hang under a real overhang, one that reaches 50% of the doorway height on north or east exposures and matches the full doorway height on the exposures where the warranty calls for it. Measure the roof over the opening before choosing the door.

Wood moves, and minor swelling and shrinking are normal for kiln-dried wood, so a door that sticks a little in August is behaving like wood. Woodgrain stands behind the door against real warp, 24 months on interior doors and 12 months on exterior doors. Keep the movement small by sealing all six edges, top and bottom included, with the same finish as the faces before the door is hung. For the jamb, the Final Frame Premium Collection comes in rot-proof options with a Limited Lifetime Warranty, the right frame for the sill of an exterior opening.

Fluted wood doors opening to the outdoors

Other Woodgrain lines

Woodgrain also makes WoodGuard, a patented engineered lumber with a pine core and a polymer plastic-coated exterior; Crafters Dowels, milled from clean, knot-free Ponderosa Pine to the diameter a project needs; and Accents by Woodgrain, wood wall tiles for accent walls.

Woodgrain lines at a glance

LineTypeUse
Fingerjoint lineal mouldingRaw, glued lengthsPainted base, casing and crown
Solid lineal mouldingRaw, many species and profilesStained or clear-finished trim
Satin CoatPrimed mouldingPainted trim
Finished EleganceFinished interior mouldingTrim that goes up ready
Prefinish AshPrefinished mouldingWood-grain trim
DecraMoldDecorative mouldingAny room or project
BlockShopCorner and divider blocksNo-miter trim
FlexgrainFlexible mouldingCurved runs
Woodgrain DoorsHardwood and softwood stile-and-rail doorsInterior and exterior openings
Carved antique wood double doors

Frequently Asked Questions

What should you do with a Woodgrain wood door before you hang it?

Bring the door into the house and let it sit flat across a pair of sawhorses for a few days so it settles to the room’s temperature and humidity. A cold garage or a damp basement isn’t a good place to wait, and neither is leaning it on end against a wall. Start finishing soon after it acclimates, because bare kiln-dried wood picks up moisture in summer and gives it up fast once the furnace runs all winter.

What’s Woodgrain’s prefinished ash moulding good for?

Use it where the trim should show real hardwood grain next to oak or ash floors, stained cabinets or wood furniture. Finishing ash on site means sanding, staining and several coats on every stick, and prefinished trim skips all of that. Put it up with a 23-gauge pin nailer so the holes are small enough to disappear under a dab of matching putty, and glue the outside miters so they stay closed.

How do you install Woodgrain base and crown moulding so the joints stay tight?

Leave the trim in the room it’s going into for a couple of days before cutting, so it shrinks or swells there and not on the wall. Cope the inside corners on base and crown instead of mitering them, because a coped joint stays closed when the wall moves. Nail into studs and plates, and glue every outside miter before you nail it.

What is Woodgrain WoodGuard?

WoodGuard is engineered lumber with a pine core inside a polymer plastic coating, so it cuts, drills and fastens like wood while the coating keeps weather off the outside. A cut end leaves the pine core bare, so seal every cut before it goes up.

Ready to Get Started?

Our decking & railing specialists can help you find the right Woodgrain products for your project.