Sheetrock is USG’s gypsum panel for hanging, taping and finishing interior walls and ceilings, from a basement remodel to a new house with a fire-rated garage wall. Contractors reach for the newer lines because they weigh less without giving up strength, and after a day of carrying board up a stairwell and holding it overhead, weight is the spec a crew feels most.
Sheetrock is made by USG Corporation, the United States Gypsum Company, which dates its start to 1902 and is headquartered in Chicago. The Knauf Group has owned USG since 2019. The Sheetrock name goes back to 1917, and it’s so common now that much of the trade says sheetrock for any drywall. Buying the real thing means the panel, the tape and the compound were all made to work together.
UltraLight 1/2 in. for walls and ceilings
Most houses get half-inch board on the walls and ceilings, and UltraLight is the half-inch to hang. USG makes UltraLight panels up to 30% lighter than traditional drywall and stronger than it, which is about as good a trade as building materials offer. The weight difference shows most on ceilings, where a crew’s arms give out first, and on the stairs of a two-story job. Edges matter more than most people think, because a crushed edge from the truck means an extra coat of mud at every joint it touches, and USG’s newest UltraLight panels are built for edge strength through delivery, hanging and taping. Even at the lighter weight, a 12-foot sheet on a ceiling still takes two people or a drywall lift, and the 54 in. wide sheet covers a 9-foot wall in two horizontal courses with no filler strip.
Fire-rated walls and ceilings
When the plans call for 5/8 in. Type X, EcoSmart Firecode X is the one to hang. It weighs up to 22% less than standard 5/8 in. Type X, and USG formulates it to match the strength and performance of standard Sheetrock Firecode X, with sound, strength and sag resistance comparable to standard 5/8 in. Type X. On a garage ceiling or a long firewall, that 22% adds up fast over a stack of sheets.
The question every crew asks about lighter Type X is whether it will pass inspection. It will. Firecode X complies with ASTM C1396 for 5/8 in. and Type X gypsum wallboard, the same standard regular Type X meets, and its UL type, ULIX, is printed on the face along the long edge of every panel, where the inspector can read it on the wall. Use it in any UL Design that lists ULIX panels. The listed spacing for Firecode X hung parallel to framing is 16 in. on ceilings and 24 in. on walls.
Storing and cutting
Most ruined board is ruined before it’s hung. Store it off the ground and under cover, and keep water off it before, during and after installation; a stack left on a job site through a Montana spring thaw soaks up snowmelt from the bottom sheet up. Firecode X is made for dry interior rooms, so keep it out of showers and other wet areas. Don’t stage it in a closed trailer or a summer attic either, since USG warns against sustained heat above 125°F. Score and snap it with a utility knife, which is faster than a saw and keeps the dust down.
Taping and finishing
The long edges are tapered, so tape and compound fill the recess and the joint finishes flush. Sheetrock paper joint tape and USG all-purpose premixed compound handle the taping and topping coats on the same board. Prime with a drywall primer or an undiluted interior latex flat paint before the finish coat. USG recommends a skim coat of joint compound over Firecode X, and it’s worth the extra afternoon on any wall that takes gloss paint or catches strong light from a big window, because that coat keeps joints and screw heads from showing through.
The rest of the Sheetrock line
The line also covers standard 5/8 in. Firecode board, 1/2 in. and 5/8 in. Firecode C and 3/4 in. Ultracode for rated assemblies that name them, 3/8 in. board, 1/4 in. regular board for laminating over worn plaster or old drywall, and 1/4 in. flexible board that bends around a curved wall or an arched opening.
EcoSmart Firecode X specs
| Spec | EcoSmart Firecode X |
|---|---|
| Thickness | 5/8 in. |
| UL Type Designation | ULIX |
| UL Classified for | Fire resistance, surface burning characteristics, noncombustibility |
| Nominal weight | 1.8 lb/sq ft |
| Widths | 4 ft. and 54 in. |
| Long edge | Tapered |
| Global warming potential | Up to 21% less |
| Recycled content | Up to 94.6% |
Frequently Asked Questions
Is Sheetrock the same thing as drywall?
Sheetrock is USG’s brand of drywall, so every Sheetrock panel is drywall but not every sheet of drywall is Sheetrock. Drywall, gypsum board and wallboard all mean the same kind of panel: a gypsum core faced front and back with paper, hung dry and finished with tape and joint compound. When the plans or a UL Design name a specific panel type, hang that exact type and not just any board.
What is Type X sheetrock?
Type X is 5/8 in. gypsum board with a core made to hold together longer in a fire, which is why fire-rated walls and ceilings call for it. EcoSmart Firecode X is an enhanced proprietary Type X. It’s rated a Class A interior finish material under the International Building Code and meets ASTM E136 for noncombustibility. On a rated assembly, the framing, fasteners and layers come from the UL Design or GA File Number on the plans, so hang it exactly the way that listing says.
How do you tape sheetrock joints?
Spread a thin bed of joint compound along the joint, press paper tape into it, and pull a knife down the tape to squeeze out the extra so no air is left underneath. Once that coat dries, cover it with two more coats, each wider and thinner than the last, and sand lightly between them. Butt joints, where the square-cut ends meet, have no taper to hide the tape, so feather those out much wider or a hump will show.
How do you hang sheetrock on a ceiling and walls?
Hang the ceiling first and the walls after, so the top wall sheet pushes up tight under the ceiling edge and helps hold it. On the walls, start with the top course against the ceiling and let any cut strip fall at the bottom, where the base trim covers it. Stagger the end joints from row to row so a seam doesn’t run straight across the wall.
How do you get mold off sheetrock walls?
Mold on paper-faced gypsum board grows into the paper, so scrubbing the surface rarely gets all of it. Find and stop the water first, then cut out the stained section back to clean, dry board and patch in a new piece. Standard board isn’t moisture resistant, so fix the damp before the new piece goes up, and keep the room ventilated after.
What’s the difference between plaster and sheetrock?
Plaster goes on wet over wood lath, and each coat has to dry completely before the next one goes on, so one room can take days. Sheetrock goes up as dry panels, and only the joints and fastener heads get compound. When you patch an old plaster wall with board, shim the new piece until its face sits flush with the plaster around it, because old plaster is often thicker than the panel.
Ready to Get Started?
Our building materials specialists can help you find the right Sheetrock products for your project.