PowerZone electrical supplies, lighting and portable heaters are for homeowners and contractors equipping a garage or workshop. For heat while you’re working, the milk house heater gives you 1300 W and 1500 W settings plus an adjustable thermostat. That adjustment is useful for long stretches at the bench.
PowerZone is an Orgill private brand. Orgill was founded in 1847. PowerZone’s portable electric heater range includes a deluxe utility heater, also called a milk house heater.
PowerZone electrical supplies include extension cords, dryer cords, security lights and brooder lamps. Its lighting range includes clamp lights, work lights, trouble lights and flashlights. Other products include magnetic safety lights, triangle lights and an engine block heater cord.
Portable heat for garage and workshop work
The PowerZone milk house heater is suitable for garages and workshops, with a listed heating capacity of 5000 Btu. Insulation, drafts and how often the overhead door opens affect how much heat stays in the room. Judge the space by how well it holds heat as well as its floor area.
The two heat settings let you choose the output, while the adjustable thermostat lets you adjust the temperature setting. You operate it with a rotary dial. When you want air movement, there’s a fan-only setting.
Automatic overheat protection directly addresses the overheating concern. The heater also includes a safety tip-over switch.
Plan the power and placement together
The heater is rated for 120 V and 12.5 A and uses a three-prong grounded plug. Account for that electrical load alongside any tools running on the same circuit.
Choose its position with the outlet and your walking path in mind. A spot beside the bench works better when the cord stays clear of moving feet and equipment. Plan that route within the heater’s 72-inch cord length.
PowerZone milk house heater specifications
| Specification | Detail |
|---|---|
| Model | BNS-15U3 Deluxe Portable Utility Heater |
| Intended spaces | Garages and workshops |
| Heat settings | 1300 W and 1500 W |
| Listed heating capacity | 5000 Btu |
| Temperature control | Adjustable thermostat with rotary dial control |
| Fan setting | Fan-only setting |
| Electrical rating | 120 V, 12.5 A, 60 Hz |
| Power cord | 72 inches |
| Plug | Three-prong grounded |
| Protection features | Automatic overheat protection and safety tip-over switch |
| Housing | Gray metal |
| Dimensions | 10 inches wide, 15 inches high and 7 inches deep |
Frequently Asked Questions
Is a PowerZone heater good for a garage or workshop?
The PowerZone milk house heater is suitable for garages and workshops, with a listed heating capacity of 5000 Btu. How well your space holds heat matters, so deal with drafts before expecting a higher heat setting to make the room comfortable.
What kind of outlet does a PowerZone heater need?
The PowerZone milk house heater is rated for 120 V and has a three-prong grounded plug. Its 12.5 A rating is a substantial load, so account for any tools sharing the circuit. The 72-inch cord also needs to reach the outlet from a position clear of your walking path.
Can you adjust the heat on a PowerZone heater?
The PowerZone milk house heater gives you 1300 W and 1500 W heat settings, plus an adjustable thermostat operated with a rotary dial. Use the heat setting to choose the output and the thermostat to adjust the temperature setting. If the lower setting keeps your work area comfortable, there’s no reason to run the higher one.
Can a PowerZone heater run just the fan?
Yes, the PowerZone milk house heater has a fan-only setting for air movement without heat. Choose that setting when you want air moving around your work area without adding warmth.
Ready to Get Started?
Our tool specialists can help you find the right PowerZone products for your project.