Nova decking and siding are for homeowners and contractors who want real wood underfoot or on an exterior wall. Batu decking is kiln-dried and inspected before shipment; Ambara siding has a clear, knot-free appearance. Start with the wood, then match the finish and fastening system to the job.
Nova USA Wood Products LLC is a wood-products wholesaler, manufacturer, and distributor based in Portland, Oregon. Steve Getsiv, John McGlocklin, and David Zugman founded it in 2005. Its lines include hardwood decking, thermally modified siding, ExoShield finishes, and QuickClip fastening systems.
Batu decking and the space beneath it
Batu suits a deck where you want a mahogany-like appearance and fairly consistent color. Nova selects it for that appearance, kiln-dries it, and has its own staff inspect it at the source before shipment. Lay the boards out before fastening so the color changes look deliberate.
Batu darkens with UV exposure. Treat the starting color as a starting point. If keeping a particular appearance matters to you, include finish upkeep in the project plan.
On a low deck, clearance is the first measurement that matters. Airflow deserves as much attention as the top face because enclosing the underside can trap moisture below the boards. Plan a hardwood deck with at least 16 inches of clearance beneath it, and keep at least 50% open area beneath the deck for ventilation.
Ambara siding for a clear wood face
Ambara is thermally modified hardwood with a clear, knot-free appearance. It’s a useful fit when you want the grain to carry the wall without knots breaking it up. Nova offers it as siding, patterns, trim, and boards.
Thermal modification uses heat and steam to improve dimensional stability and decay resistance. Exterior wood still takes on and releases moisture. Plan the siding installation around board movement and a path for water to drain.
Fasteners that accommodate wood movement
ExoDek QuickClip is Nova’s hidden decking fastener; ExoClad QuickClip is its rainscreen siding mounting system. Nova’s hidden decking fasteners allow boards to swell and shrink with humidity changes. Its resilient siding QuickClips also allow humidity-related movement. That movement allowance matters when you’re choosing how to secure the boards.
Nova’s raised decking-fastener design lifts boards above the joists for airflow. Its siding design creates space behind the wood for drainage and ventilation. The decking lift is 1/8 inch, and the siding air gap is 3/4 inch.
ExoShield finish
ExoShield is Nova’s tung-oil-based exterior wood stain, with UV protection among its stated features. The wood’s own color affects the finished result. Test the color on an offcut of the actual wood before coating the whole job.
Product specifications
Nova lists Batu in the sizes and lengths below. Work the lengths into your deck layout before cutting, with framing support planned wherever board ends meet.
| Product or detail | Specification |
|---|---|
| Batu decking sizes | 1x4, 1x6, 5/4x4, 5/4x6 |
| Batu lengths | 8–20 feet |
| Hardwood deck clearance guidance | At least 16 inches beneath the deck |
| Under-deck ventilation recommendation | Minimum 50% open area |
| Nova decking-fastener design | Raises boards 1/8 inch above joists |
| Nova siding design | Creates a 3/4-inch air gap behind siding |
| ExoShield base | Tung oil |
| ExoShield colors | Clear, Natural, Mahogany, Walnut, Black Walnut, Platinum, Antique Bronze |
Frequently Asked Questions
What is Nova Batu decking like?
Batu has a mahogany-like appearance, a moderately fine texture, and typically interlocked grain. If you want the board color to look deliberate across your deck, lay the boards out before fastening; the wood also darkens with UV exposure.
Can you use Nova hardwood decking close to the ground?
Nova recommends at least 16 inches of clearance beneath a hardwood deck, so measure that space before settling the layout. For close-to-ground applications, its guidance specifies 4-inch nominal material and excludes 6-inch nominal boards; ventilation beneath the deck still needs at least 50% open area.
What is Nova Ambara siding?
Ambara is thermally modified hardwood with a clear, knot-free appearance, offered as siding, patterns, trim, and boards. The modification uses heat and steam without chemicals; plan the installation so the boards can move with moisture changes and water can drain behind them.
What’s the difference between Nova ExoDek and ExoClad QuickClip?
ExoDek QuickClip is a hidden decking fastener, while ExoClad QuickClip mounts rainscreen siding. Match the system to the surface you’re building, then plan the fastening layout around the installation instructions for that system.
Ready to Get Started?
Our landscape & concrete specialists can help you find the right Nova products for your project.