Messmer’s wood stain is for homeowners and contractors protecting exterior decks, fences, siding, and log homes. For cedar, pine, or redwood, UV Plus gives you a penetrating oil finish with UV and water resistance. Its colors range from lightly pigmented toners to semitransparent shades.
Messmer’s Inc. manufactures exterior wood stains and finishes in West Jordan, Utah. Its products have protected exterior wood since 1989. All its products are made in the USA.
UV Plus and the upkeep to expect
UV Plus needs to penetrate completely to work properly. Leaving excess stain on the surface is the application mistake to avoid. Remove it promptly, because cured excess may require chemical stripping or sanding.
On a deck, UV Plus has an expected life of 1–2 years. Plan your maintenance around that interval. Before recoating, clean the wood, brighten it, or do both as the surface needs.
Color depends on the wood
The pigment does useful work. Messmer’s transparent iron oxide pigments absorb UV radiation while allowing visible light to pass through, giving pigment a practical role in protecting the wood’s appearance.
Wood texture, age, and porosity affect UV Plus color and appearance. An older fence and a newer deck can take the same stain differently. Test the color on each surface before doing the whole job.
Get the wood and weather ready
Give new pressure-treated lumber several weeks to dry thoroughly before applying UV Plus. Dry wood is the requirement. Check replacement boards separately from the older wood before staining.
Pay attention to the wood temperature: UV Plus calls for a surface temperature of 50–90°F. Avoid direct sunlight on hot days, and let boards that feel hot to the touch cool before application.
Rain on fresh UV Plus can force stain out of the wood pores and leave a blotchy appearance. It needs at least 24–48 hours to dry under good conditions. Wait to apply it until no precipitation is expected for 48 hours.
Other Messmer’s finishes
UV Plus for Hardwoods is an oil-based penetrating finish for ipe, mahogany, and other exotic woods.
Caribbean Extreme Teak Oil Finish is another penetrating option for teak, ipe, mahogany, and other dense exotic hardwoods; apply it to clean, dry wood with previous coatings weathered away or removed so it can penetrate completely.
Timberflex is a film-forming finish for log and timber-frame homes.
UV Plus specifications
| Property | UV Plus |
|---|---|
| Finish type | Penetrating oil-based exterior wood stain |
| Suitable woods | Cedar, pine, and redwood |
| Projects | Decks, siding, fences, log homes, and other exterior wood projects |
| Color range | Lightly pigmented toners through semitransparent shades |
| Expected life on decks | 1–2 years |
| Expected life on smooth vertical surfaces | 2–3 years |
| Expected life on rough surfaces | 3–4 years |
| Recommended application surface temperature | 50–90°F |
| Drying time under good conditions | At least 24–48 hours |
| Recommended precipitation-free forecast | 48 hours after application |
Frequently Asked Questions
How long does Messmer’s stain last?
UV Plus has an expected life of 1–2 years on decks, 2–3 years on smooth vertical surfaces, and 3–4 years on rough surfaces. If you’re staining both a deck and siding, plan on different recoating schedules.
Can you put Messmer’s stain on pressure-treated wood?
You can apply UV Plus to new pressure-treated lumber after giving it several weeks to dry thoroughly. The waiting period alone isn’t enough; the wood needs to be dry before you stain it.
Will Messmer’s stain peel or flake?
Properly applied UV Plus penetrates the wood instead of forming a surface film, so it isn’t subject to peeling or flaking. More stain isn’t better: it needs to soak in completely, and you need to remove excess promptly.
Can you use Messmer’s over an old finish?
Caribbean Extreme can go over a previous finish only if it has weathered enough to allow complete penetration. You can’t apply it over paint or another film-forming coating. The surface needs to be clean and dry, with previous coatings weathered away or removed.
Ready to Get Started?
Our paint & finish specialists can help you find the right Messmer's products for your project.