Mayhew punches and chisels are for homeowners and contractors loosening pins, driving them out, marking drill starts and cutting metal. Separate tools handle each part of the work, so you can match the working end to the repair. Choose by the work at the tip.
Mayhew Steel Products, Inc., doing business as Mayhew Tools, is based in Turners Falls, Massachusetts. Founded in 1856, the company is known for punches and chisels. The Lawless family gained controlling interest in 1962 and full ownership in the 1990s.
Mayhew manufactures most of its products domestically and sources selected items globally. For the particular punch, chisel or bar you’re choosing, check its country-of-origin marking.
Match the punch to the stage of the job
Start a seized pin with a solid punch to loosen it, then switch to a pin punch to drive it through. Mayhew assigns those tools distinct jobs. Starting a stubborn pin with a slender pin punch can bend the punch before the pin moves. The sequence matters: loosen first, drive through second.
Match the pin punch tip to the pin so it bears squarely and clears the hole. Too small a tip concentrates the blow and can damage the pin’s end. Support the part, leave the pin an exit path and keep the punch lined up with it.
For a drill start, Mayhew offers center punches. The dimple gives the bit a place to begin. Put the mark on your layout before you bring the drill to it.
Choose a chisel for the material and access
Mayhew cold chisels handle cutting and chipping unheated metal. Choose the cutting width for the area you need to remove, and support the work so it stays put under the blow.
Mayhew also offers floor chisels and flat utility chisels. For stripping work, the useful edge is one you can get under the material and control. Work at a shallow angle and lift a small section first to see how the surface underneath is taking it.
An individual tool suits a known repair; Mayhew’s center punch sets and cold chisel sets suit a broader range of work when their contents match the jobs ahead.
For prying, Mayhew offers Dominator bars; choose a bar whose tip reaches the gap and whose handle has room to move.
Mayhew insert bits work with a screwdriver or various power tools using a bit adapter, so match the bit and adapter to your tool.
Mayhew’s U.S.-made hand tools carry lifetime coverage against material and workmanship defects under normal wear and tear. Stated exclusions include brass and hollow punches.
Selected punch and chisel sizes
These individual tool dimensions help you match the working end and reach to the job.
| Tool | Dimensions |
|---|---|
| Cold chisel | 1/2 inch × 6 inches |
| Cold chisel | 3/4 inch |
| Long pin punch | 1/8 inch × 6 inches |
| Center punch | 5/16 inch with a 5/32-inch point |
Frequently Asked Questions
Are Mayhew tools good?
Mayhew makes a solid choice for punch and chisel work: its 21-piece punch and chisel foam set includes chisels forged from high-alloy steel. That’s a useful construction for a tool that takes repeated blows. You get more value from working ends that fit your repairs than from a larger piece count alone.
Where are Mayhew tools made?
Mayhew makes most of its products in the United States and sources selected items globally. Its two Massachusetts manufacturing facilities support metal forging and plastic manufacturing. If U.S. manufacture matters to you, the individual tool’s origin marking is what counts.
What is a Mayhew punch set used for?
A Mayhew punch set is useful when you need different punches for different stages of a repair. Solid punches loosen seized pins and keys, pin punches drive them out once loosened, and center punches mark drill starts. Those names describe different jobs, so the contents matter more than the number of pieces.
What is a Mayhew Dominator pry bar used for?
A Mayhew Dominator pry bar gives you leverage to pry material loose. A firm bearing point matters as much as room to swing the handle: if the surface beneath the bar crushes, you lose control of the movement. A broad block beneath that bearing point spreads the load when the surface needs protection.
Ready to Get Started?
Our tool specialists can help you find the right Mayhew products for your project.