Brand
Brand Overview Tools

Max

MAX Nailers for Framing, Siding and Trim Max

MAX nailers give contractors separate tools for framing, siding and trim work. The framing coil nailer handles nails through 3½ inches, while the SuperFinisher brad nailer pairs a placement-guiding nose with a no-mar tip for finished trim. Choose around the fastener your work requires.

MAX is an industrial-tool and office-product manufacturer with origins dating to 1942. MAX CO., LTD. has its corporate headquarters in Tokyo, Japan. MAX USA CORP., based in Plainview, New York, is owned by MAX CO., LTD.

Framing and siding start with the nail

If you’re counting on using nails already in the trailer, the framing coil nailer uses 15-degree wire-welded coil nails. Match that format and the accepted length before counting leftover boxes toward the job. The SuperFinisher brad nailer takes 18-gauge brads in straight, glue-collated strips.

The siding coil nailer takes nails up to 2½ inches; the framing coil nailer handles lengths from 2 through 3½ inches. Where those lengths overlap, nail diameter, head, coating and the required fastening still govern the choice. For siding, match the nail to the siding material and what’s behind it.

If a coil nailer starts jamming, a bent nail or damaged collation is worth checking early. Disconnect the air before inspecting the feed area or clearing a jam.

SuperFinisher for casing and trim

The SuperFinisher brad nailer is intended for finish and trim work, including door and window casing and panel assembly. Its precision-point contact nose guides placement, and its no-mar tip is intended to prevent driver marks on wood trim. That combination suits work beside a casing profile. Keep the tip clean so grit stays off the finished wood.

The depth-adjustment dial lets you tune nail penetration. Make a test fastening in an offcut of the same material, especially when changing trim, and aim for a head just below the surface. For tight corner work, the flat-top design allows nailing as close as ⅛ inch from a vertical wall or surface.

Carpenter fastening sheathing inside a new frame

Air supply and reloading

Plan for a compressor and hose with a MAX pneumatic nailer. The SuperFinisher brad nailer operates at 60–120 PSI and has a ¼-inch air inlet. Its listed air consumption is 0.02 cubic feet per cycle, so compressor sizing needs to account for your firing pace and other tools running at the same time.

The SuperFinisher holds 100 nails. Its anti-dry-fire mechanism stops firing when seven remain, making that the reload point.

Hammer on a roof deck

Nailer specifications

These specifications apply to the individual tools listed below.

ToolModelFastener formatNail length
Framing coil nailerCN890F315-degree wire-welded coil nails2–3½ inches
Siding coil nailerCN565S2Coil nailsUp to 2½ inches
SuperFinisher brad nailerNF255SF2/1818-gauge, straight, glue-collated brads⅝–2⅛ inches

Frequently Asked Questions

What size nails does the MAX siding nailer take?

The MAX siding coil nailer takes nails up to 2½ inches long. You still need to match the nail to the siding manufacturer’s fastening requirements; length alone doesn’t settle the choice.

What nails fit the MAX framing coil nailer?

The MAX framing coil nailer takes 15-degree wire-welded coil nails from 2 to 3½ inches long. Check the collation as well as the length before loading, because a coil that fits inside the magazine isn’t proof the nails are compatible.

How much air pressure does a MAX air nailer need?

The MAX SuperFinisher brad nailer runs at 60–120 PSI, but that range isn’t a setting for every nailer in the brand. Use your tool’s specified pressure range and check the regulator while you’re firing; pressure at rest won’t show whether the air supply keeps up.

What is the MAX 18-gauge brad nailer used for?

The MAX 18-gauge brad nailer is made for finish and trim work, including door and window casing and panel assembly. Its sequential-fire trigger requires you to place the contact nose before pulling the trigger for each shot. The built-in air duster helps clear debris so you can see your placement.

Ready to Get Started?

Our tool specialists can help you find the right Max products for your project.