Malco tools are for HVAC installers and exterior remodelers cutting and shaping sheet metal or working on siding. Andy snips have replaceable blades, so a worn cutting edge can be replaced while you keep the tool.
Malco is a professional tool manufacturer headquartered in Annandale, Minnesota, with a manufacturing facility there. Mark W. Keymer founded the company in 1950. Its tools serve HVAC, building construction and exterior remodeling trades. Aspen Pumps Group acquired Malco in 2024.
Snips and powered cutting
Choose Andy snips by the direction your cut needs to go. Light gray handles are for straight cuts; dark gray handles support straight, left and right cuts. Choosing by length alone is a mistake when the layout includes curves. Match the cutting direction to your layout.
The Andy line includes regular and gripped aluminum handles, plus an offset left snip. Handle style deserves attention when you’re making repeated cuts. Choose a grip you can control comfortably through the cutting motion.
TurboShear includes drill attachments and air tools. Powered cutting is worth considering when repeated cuts make hand cutting the slow part of the job. Match the cutting tool to the material and thickness, then match its power requirements to your equipment.
Shaping edges and making connections
A seamer bends or flattens an edge; a crimper reduces an end so it can fit into the adjoining piece. Malco’s hand seamer uses compound-leverage handles to multiply the force you apply at the jaws. For a bent flange or a flattened fold, use a seamer.
Malco’s TurboCrimper line consists of sheet metal crimpers for work where the connection calls for a reduced end.
Malco’s hand notcher makes a V-shaped cut in one motion, so lay out the notch where the adjoining edges need to meet when the metal is folded.
Siding installation and repair
Malco’s fiber cement siding gauges help with course positioning while you fasten. Set the exposure for the siding you’re installing and check the course against your layout as you work. Keep the course level through the fastening sequence.
Malco also lists vinyl siding tools, and a siding removal tool serves repair work by releasing the panel interlock.
A snap-lock punch raises tabs in a cut siding edge so it can engage receiving trim. Malco makes a hand-operated version. Use it at details where the siding system calls for punched locking tabs.
Blade replacement and driver upkeep
Worn Andy blades can be replaced without replacing the whole snip. Every Andy snip has replaceable blades, so match the replacement blades to the snip you have.
For fastening, Malco’s C-RHEX hex drivers are cleanable and reversible, and you can change sizes while the shank stays installed in the drill chuck.
Tool specifications
| Tool or feature | Specification |
|---|---|
| Andy snips with light gray handles | Straight cuts |
| Andy snips with dark gray handles | Straight, left and right cuts |
| Andy blades | Replaceable on all Andy snips |
| Andy offset left snip, MC12L | 12-inch snip with aluminum handles |
| Andy handle options | Regular and gripped aluminum handles |
| TurboShear range | Drill attachments and air tools |
| Hand seamer | Compound-leverage handles |
| Hand notcher | V-shaped cut in one motion |
| Snap-lock punch | Hand-operated |
Frequently Asked Questions
What are Malco tools used for?
Malco makes tools for HVAC, building construction and exterior remodeling. A hand seamer bends or flattens an edge, while a crimper reduces an end for a connection. Those are different operations, so the shape you need to leave behind determines the tool.
Is a Malco TurboShear a drill attachment?
The Malco TurboShear range includes drill attachments and air tools. That distinction matters when you’re matching the cutter to your equipment. Cutting capacity and power requirements depend on the particular tool.
What is a Malco C-RHEX bit?
A Malco C-RHEX bit is a cleanable, reversible hex driver. You can change sizes while its shank stays in the drill chuck, and the removable socket gives you access to clean the socket and magnet. That access matters when buildup keeps a screw head from seating properly.
Where are Malco tools made?
Malco has a manufacturing facility in Annandale, Minnesota. That doesn’t mean every tool in the range is made in the United States, so you can’t use the company’s location as proof of an individual tool’s country of origin.
Ready to Get Started?
Our tool specialists can help you find the right Malco products for your project.