Magna

Mag-Torch torches and torch kits are for homeowners and tradespeople tackling soldering and repairs. The range covers light soldering and rusted bolts through large-diameter soldering and brazing, with pressure-regulated choices for inverted work. Choose by joint size and working angle.

Mag-Torch’s range includes hand torches, specialty torches and microtorches. Its history began with a propane-powered heater sold in the 1970s. Founder Larry Whited launched its first propane torch in 1982.

Match the brass torch to the working angle

The Classic Brass and Wide Flame Brass torch heads work best upright. Look at the joint before choosing the torch. If reaching it means tipping the cylinder over, choose a model recommended for inverted work: some torches can pass liquid propane through when inverted and extinguish the flame.

Choose a torch kit by that same working requirement, then compare its contents with what you already have. The Mag-Torch Spark Lighter provides a spark for a manually started torch. Check the torch’s starting method and the included-items list on the particular package.

Allow for cold and larger joints

In the Flathead Valley, inversions trap cold on the valley floor from late October through February, and very cold conditions reduce gas pressure in the cylinder. The pressure-regulated Utility torch is recommended for inverted work and cold-weather projects, while the Utility kit is intended for light soldering, loosening rusted bolts and softening putty or paint.

Bigger soldering and brazing jobs call for a torch intended for that work. A larger joint carries heat away from the area you’re heating, so matching the flame to the job matters. The MagFlame 360 Ultra uses an ultra-swirl flame for large-diameter soldering or brazing.

Match the fuel to the torch

Mag-Torch lists propane for small soldering jobs, softening putty or paint and loosening rusted bolts. It lists MAP-Pro for large-diameter copper-pipe soldering, brazing and heat treating. Use MAP-Pro only with a torch designed for that fuel.

Keep the ignition path clear

If your Mag-Torch stops lighting, check spark, fuel flow and cleanliness of the tip and tube. Ignition-wire corrosion or a blocked burn tube can cause ignition trouble. A brush can damage ignition wires or the swirl fan inside some torches; clear debris with compressed air or a soft pipe cleaner.

Torch and accessory specifications

Mag-Torch product	Model	Working position or function
Classic Brass Torch	MT200C	Works best with the torch head upright
Wide Flame Brass Torch	MT245C	Works best with the torch head upright
Spark Lighter	MT100	Spark ignition accessory

Frequently Asked Questions

What can you use a Magna torch for?

Mag-Torch’s range covers small soldering jobs through large-diameter soldering and brazing. Match the fuel and torch to your work: propane suits small soldering jobs, while butane suits soldering electronic circuits. For large-diameter copper-pipe soldering, MAP-Pro is an option only with a torch designed for that fuel.

Does a Magna torch kit come with propane?

A Mag-Torch kit is offered with a 14.1-ounce propane-filled cylinder. Check your particular kit’s included-items list before counting on fuel being in the box, especially if you’re comparing it with a torch sold on its own.