Brand
Brand Overview Building Materials

Lambro

Lambro Dryer Vents, Ducts and Vent Kits Lambro

Lambro dryer vents, ducts and vent kits are for homeowners and installers replacing an outside hood or putting together dryer, bathroom and kitchen exhaust runs. You can get the duct and vent together in a kit, or choose separate duct, caps and connecting parts to fit the job.

Lambro Industries is a ventilation-products manufacturer and distributor based in Amityville, New York. Founded in 1967, the company began supplying HVAC, electrical wholesale and lumberyard businesses. Its range covers metal and plastic ventilation products and HVAC components, mostly for residential settings and some commercial buildings.

A kit for the connection or a separate outside hood

You have both choices. Lambro’s complete transition-duct and Preferred Hood Vent kit puts the dryer connection and outside vent together. Its venting kits bundle duct, vent, clamps and a trim plate, saving you the work of selecting each piece separately.

For an outside-vent replacement, Lambro offers a separate aluminum wall dryer exhaust hood with a damper and attached pipe. Measure the existing duct diameter and the depth the pipe has to reach through the wall. Check the mounting area, too, so the new flange has sound material to fasten to.

Choose the duct for the exhaust

Lambro offers foil, semi-rigid and vinyl flexible ducts, plus rigid aluminum and galvanized pipe and elbows. Start with the appliance. For clothes dryers, Lambro’s guidance calls for rigid or semi-rigid metal vent pipe; keep vinyl and flexible plastic duct out of the dryer run.

Flexibility helps you make a connection, but a crushed bend restricts the exhaust. Lay out the connection with the dryer in its final position. Leave room for the bend.

Lambro’s connectors and clamps handle the joints between compatible duct sections. Match the connector and clamp to the duct size and material, keep flexible duct round as you tighten it, and seal the joints airtight.

Basement laundry room with washers and a utility sink

Kitchen and bathroom venting

For a rectangular kitchen exhaust connection, Lambro offers aluminum duct, elbows and wall caps. Match the shape and dimensions at the appliance, through the run and at the outlet before assembly.

For bathroom ductwork crossing an attic, Lambro recommends sealing and insulation and directs the exhaust outdoors. Warm, damp air can condense against cold surfaces. Carry it outside through a sealed, insulated run.

Round dryer vent hood on an outside wall

Keep the outlet working

Lambro offers wall and roof exhaust vents, including a roof dryer vent with a damper and no screen. Dryer lint can collect on mesh, so keep added screening out of the dryer exhaust path.

Vents, ducts and louvers need regular cleaning to clear lint, dust and debris. Check that the damper opens freely and closes when the exhaust stops. Leave access to the parts you’ll need to clean.

Selected vent and kit specifications

ProductItemSize and constructionIncluded features
Transition-duct and Preferred Hood Vent complete kit#2804-inch diameter by 5-foot transition ductPreferred Hood Vent
Wall dryer exhaust hood#3444-inch diameter; 26-gauge aluminum; 11-inch pipeDamper
Rectangular wall exhaust vent#10603-1/4 by 10 inches; 22-gauge aluminum; 5-inch tailGasketed spring damper
Louvered vent on a wall

Frequently Asked Questions

What comes in a Lambro dryer vent kit?

Lambro offers a dryer vent kit that pairs a 4-inch by 5-foot transition duct with a Preferred Hood Vent. That gives you the dryer connection and outside hood together. The 5-foot duct length still needs to suit your connection without being crushed behind the dryer.

How do I choose a replacement Lambro dryer vent cover?

Check the duct diameter and wall depth, because you’re fitting the pipe as well as the cover. Lambro offers a 4-inch aluminum wall dryer hood with a damper and an 11-inch pipe. Matching the opening alone isn’t enough if the attached pipe won’t reach your duct connection.

Should I put a pest screen on my Lambro dryer vent?

Added mesh can catch lint and restrict your dryer exhaust. Lambro offers a 4-inch aluminum roof dryer vent with a damper and no screen. A screen that works for another exhaust application isn’t automatically suitable for a dryer.

Can I use a Lambro dryer vent indoors?

Your dryer exhaust needs to go outdoors through suitable metal ductwork. Lambro’s dryer guidance calls for rigid or semi-rigid metal vent pipe. Catching lint indoors doesn’t remove the moisture from the exhaust.

Ready to Get Started?

Our building materials specialists can help you find the right Lambro products for your project.