Gorilla glue and tape are for wood joints, assembly work and everyday repairs tackled by pros and DIYers. The range gives you separate wood glues, construction adhesives, repair tapes and mounting products to match the job. Start with the material and the way the pieces fit.
The Gorilla Glue Company is based in Cincinnati, Ohio. It has been selling Gorilla Glue for over two decades. Its range includes glues, construction adhesives, tapes, sealants and repair fillers.
Match the glue to the joint
For a wood-to-wood joint, start with Gorilla Wood Glue. Dry-fit the pieces and work out how you’ll hold them together before opening the bottle. Get the joint sitting square and closing evenly under clamp pressure.
Gorilla’s Super Glue range includes gel and Micro Precise options. For a small repair with mating edges, match the formula’s material directions to both pieces. Gorilla also offers an Epoxy line for jobs calling for epoxy.
For Gorilla Glue, Super Glue and Wood Glue, follow the waiting time on the exact bottle you’re using. Keep clamping, handling and full cure separate when planning the job. A joint that stays together when you release it can still need more time before carrying a load. Keep it supported for the specified period and wait for the stated full cure before putting the repair to work.
Gorilla Construction Adhesive Ultimate is another option when you’re assembling building materials. Check its directions for the surfaces you’re joining, dry-fit the assembly and have your supports ready before applying the adhesive.
Keep fabric and craft repairs clean
Gorilla’s glue range includes craft glues and spray adhesives. On delicate materials, use a thin, even coat with a formula suited to the material. Saturating paper can make it buckle.
Fabric needs a test patch because adhesive can bleed through lightweight cloth or leave a wet-looking mark. Prewash without fabric softener and test a scrap before working on the finished piece. For fabric crafting, allow at least three days before washing or ironing, then use a delicate wash and low-heat or no-heat drying.
Choose repair tape by surface and temperature
Silver Gorilla Tape grips smooth, rough and uneven surfaces and lists polyethylene and polypropylene among its compatible plastics. Reserve Double-Sided Super Glue Tape for compatible repair materials other than those two plastics, with even contact against both surfaces. For Silver tape, keep EPDM rubber and PVC outside the repair plan because their oil or plasticizer content interferes with adhesion.
Start with a clean, dry surface, smooth out pockets and rub the entire strip firmly, especially along the edges. Gorilla Tape’s adhesive strength builds over the first 24 hours. Give a critical repair that time before loading it.
All-Weather Gorilla Tape is waterproof and uses a permanent butyl adhesive that can feel less tacky at first. Judge the application by clean contact and vigorous rubbing. In the Flathead Valley, the average winter low of 16°F falls within its 0°F to 200°F service range; application still requires temperatures above 40°F, preferably room temperature.
Crystal Clear Gorilla Tape can yellow under long-term extreme heat, which matters on a visible repair. For temporary automotive repairs, extended use or prolonged heat can leave residue on paint or clear coat. Test an inconspicuous spot first.
Use mounting products for hanging work
Gorilla offers Heavy Duty Mounting Tape and Clear Invisible Hold Mounting Squares. Match the mounting product to the surface and load described in its directions. The hold also depends on the finish underneath, so check for loose paint before applying tape or squares.
Tape specifications
| Product | Listed roll sizes | Application temperature | Service temperature | Moisture performance |
|---|---|---|---|---|
| Silver Gorilla Tape | 1.88 in. × 10 yd.; 1.88 in. × 30 yd.; 2.88 in. × 25 yd. | 40°F to 120°F; best at room temperature | Up to 150°F continuously; up to 200°F intermittently | Moisture resistant |
| Permanent Gorilla Tape All-Weather | 1.88 in. × 10 yd.; 1.88 in. × 25 yd. | Above 40°F; best at room temperature | 0°F to 200°F | Waterproof |
Frequently Asked Questions
Does Gorilla Glue work on wood?
Yes. Gorilla Wood Glue is the option to start with for a wood-to-wood joint. Dry-fit your pieces first: clamp pressure should hold a well-fitting joint closed, and forcing a poor fit puts stress back into the joint when the clamps come off.
Does Gorilla Glue work on fabric?
For fabric work, you need a Gorilla adhesive with directions that cover your material. Test a scrap first because adhesive can bleed through lightweight fabric or leave a wet-looking mark. Prewash without fabric softener, then allow at least three days after gluing before washing or ironing.
What is Gorilla Tape used for?
Gorilla Tape is used for heavy-duty repairs, but the version matters: Silver grips smooth, rough and uneven surfaces and is moisture resistant, while All-Weather is waterproof. For temporary automotive repairs, test an inconspicuous spot because prolonged heat or extended use can leave residue on paint or clear coat. It isn’t a substitute for electrical tape.
What is Gorilla construction adhesive used for?
Gorilla construction adhesive is for bonding building materials during assembly. Match the exact formula to both surfaces and have your supports ready before applying it. A bond to loose paint is only as secure as that paint, so surface preparation matters as much as getting the pieces positioned.
Ready to Get Started?
Our building materials specialists can help you find the right Gorilla products for your project.