GE caulk seals joints around your windows, doors, tubs and sinks, with paintable formulas for trim. Exterior silicone handles weather and temperature changes, while Kitchen & Bath silicone handles water and humidity. Decide where the paint stops before you lay the bead.
GE Sealants is the GE-branded range of caulks, silicone sealants, insulating foams, fillers and application accessories. Henkel Corporation produces products in the range. Its caulks and sealants include silicone, paintable silicone and acrylic formulas for exterior sealing, wet joints and preparation for paint.
The broader GE grouping also includes lighting, ballasts, a window and door alarm, and a flashlight.
Match the sealant to the finished joint
GE’s 100% Silicone Window & Door sealants withstand weather, changing temperatures and UV exposure. Silicone’s flexibility lets the bead move with the joint. Use it where the bead will stay exposed.
Around tubs, sinks and splash zones, GE’s 100% Silicone Kitchen & Bath sealants fit the water and humidity exposure. Supreme Silicone Kitchen & Bath comes in white, clear and almond, so choose the bead color to suit the adjoining surfaces.
For a joint you’re going to paint, use a paintable formula and leave pure silicone as the finished bead. Seal & Fill Multi-Purpose Window & Door Caulk is paintable and intended for windows, doors, siding and trim, with drying times of 30 minutes before latex paint and 24 hours before oil-based paint.
Pro Seal Max Kitchen & Bath gives you a paintable hybrid formula with a stated 60-minute paint-ready time and a full cure of 24 to 74 hours, depending on temperature, humidity, substrate porosity and bead thickness.
Give the bead time to cure
Water readiness governs the first water exposure; full cure takes its own time. Advanced Silicone Kitchen & Bath takes 24 hours to cure fully. Touching fresh sealant can flatten the bead or break its bond along an edge. Leave the finished bead undisturbed while it cures.
Prepare the joint before opening the tube
A fresh GE sealant line needs a bare, dry surface. Remove the old caulk and residue so the new bead bonds to sound edges. In a deep joint, closed-cell polyethylene backer rod sets the bead depth and limits bonding to the joint sides so the sealant can flex.
Cut the nozzle at 45 degrees near the tip, keeping the opening suited to the bead. Tape both sides of the joint, apply a steady line and smooth it with a sealant tool. GE’s clean-lines method calls for one tooling pass within five minutes, followed immediately by peeling the tape away from the bead at 45 degrees.
Supreme Silicone Kitchen & Bath specifications
| Detail | Supreme Silicone Kitchen & Bath Sealant |
|---|---|
| Advertised water readiness | 30 minutes |
| Colors | White, clear and almond |
Follow the tube’s application conditions when scheduling that first water exposure.
Frequently Asked Questions
Is GE silicone caulk paintable?
Pure GE silicone caulk doesn’t accept paint, so a joint you’re painting needs a paintable formula. Paintable silicone works well with most water-based acrylic paints. Check the tube’s paint-ready time before you brush over the bead.
What is GE Advanced Silicone 2 Kitchen & Bath used for?
GE kitchen and bath silicone seals joints around tubs, sinks and splash zones exposed to water and humidity. Its advertised 30-minute water readiness doesn’t mean the bead is fully cured; follow the tube’s conditions before exposing it to water. Keep the cured bead clean, because soap residue can support mold and mildew growth.
How do you use GE silicone caulk?
GE silicone caulk needs a bare, dry joint, so remove the old sealant and let the surface dry completely. Tape both sides, apply the bead and smooth it in one pass with a sealant tool within five minutes. Use the tool instead of your finger, and remove the tape immediately after smoothing so you leave a clean edge.
How do you open a GE silicone tube?
Cut the nozzle of your GE silicone tube at 45 degrees near the tip, keeping the opening sized to the bead you need. If there’s an inner foil seal, pierce it before dispensing. Start with a small opening; you can cut it larger if the joint needs a wider bead.
Ready to Get Started?
Our building materials specialists can help you find the right GE products for your project.