Brand
Brand Overview Doors & Millwork

Flex Trim

Flex Trim Flexible Moulding Flex Trim

Flex Trim flexible moulding is for builders and homeowners fitting trim around curved walls and arched openings. You can carry a matching trim profile through the curve, with material choices for tight bends, intricate details and painted or stained finishes.

Flex Trim started in 1985 and manufactures flexible architectural moulding. Its parent, Carter Millwork, Inc., is a second-generation family-owned company based in Lexington, North Carolina. Profile matching is a central part of its offering, with more than 50,000 profiles and a Made to Match process for reproducing wood moulding and decorative details.

Match the material to the curve

Base against a curved wall bends through its thinner dimension, where moulding bends most easily. Casing around an arch asks the profile to bend in a different direction. Wider and thicker pieces resist bending more, and straight pieces generally suit larger true-radius arches, with suitability determined by the radius relative to the profile width.

Most crown needs pre-bending, depending on its size, the radius and how it’s installed. The mistake is treating every curve as something you can pull into shape with nails. Settle the shape before installation. Half rounds, ovals and ellipses generally require pre-bending unless the profile is very small.

For tight curves and small, intricate patterns, choose ZzzzFLEX. Those are its recommended applications. Ultra-Flex comes pre-primed for painting and staining, and its back is sanded to improve glue adhesion. That gives you a prepared face for finishing and a sanded back where the adhesive goes.

Plan the stained finish with the profile

Most Flex Trim profiles have grain and can be stained. A stained finish is a practical option. Gel stain is required; test the finish beside your existing wood before finishing the whole run, because matching the color is a separate job from matching the shape.

All Flex Trim material is paint grade, so painting is an option across the range. Machinable S4S is specifically intended for painted applications and is supplied only in straight lengths.

Arched doorway with tall shutters

Match the actual wood trim

A dimensioned tracing of your existing moulding gives you a useful starting point. Wood moulding dimensions can vary between suppliers and mills, even for the same profile. Record the actual shape and dimensions, along with the original manufacturer’s or distributor’s name when available.

The Made to Match process can reproduce wood moulding using a mold made from the actual wood piece. That’s useful where curved trim meets an existing straight run. For stained work, a continuous wood pattern avoids a pattern joint in the middle.

Curved staircase wall with moulding

Fit it relaxed, then fasten it

Flex Trim can be worked with conventional woodworking tools. Dry-fit the pieces before applying adhesive so you can check the joints and make sure the moulding sits in a relaxed position.

Apply construction or panel adhesive continuously along the back. Nails hold the moulding while the adhesive bonds. Keep nails to a minimum and follow the spacing and edge distances below.

Specifications

FeatureSpecification
ZzzzFLEX materialElastomer composite
Ultra-Flex materialSyntactic polyurethane compound
Straight casing exampleA radius greater than 72 inches is suitable for a straight piece of 2-1/4-inch casing
Xtrulinear lengths12 to 500 feet in one continuous piece
Nail spacingAt least 6 inches apart
Nail edge distanceAt least 3/8 inch from the moulding edge
Ornate crown moulding on a ceiling

Frequently Asked Questions

Does Flex Trim need to be pre-bent?

It depends on the profile and the curve. Most crown and most half rounds, ovals and ellipses need pre-bending unless the profile is very small. A straight piece of 2-1/4-inch casing suits a true-radius arch greater than 72 inches, but that example doesn’t establish the limit for other profiles.

Can you paint or stain Flex Trim?

You can paint all Flex Trim material, and most profiles have grain that can be stained. Staining requires gel stain, and compatibility needs to be confirmed before you plan around a stained finish. A sample beside the adjoining wood tells you more about the color match than the profile alone.

Can you use Flex Trim outside?

Yes, Flex Trim is made for interior and exterior applications. The material doesn’t absorb moisture, which makes it useful where damp conditions are a concern. Exterior use still needs a suitable adhesive and finish; moisture resistance doesn’t settle those choices.

How do you attach Flex Trim moulding?

Fit Flex Trim in a relaxed position, with construction or panel adhesive applied continuously along the back. Nails hold it while the adhesive bonds; keep them at least 6 inches apart and at least 3/8 inch from the edge. Staples aren’t suitable for fastening this material.

Can Flex Trim match existing wood moulding?

Yes, the Made to Match process uses actual wood moulding to make a mold that reproduces its shape and grain. A dimensioned tracing helps identify the profile, since the same profile can vary slightly between mills. Matching the shape doesn’t guarantee a matching stain color.

Ready to Get Started?

Our doors & millwork specialists can help you find the right Flex Trim products for your project.