Brand
Brand Overview Paint & Finish

Dunn-Edwards Evershield

Dunn-Edwards Evershield Exterior Paint Dunn-Edwards Evershield

Evershield exterior paint is for homeowners and painters coating properly prepared and primed wood, stucco, masonry and exterior metal. It’s a 100% acrylic paint from Dunn-Edwards, which claims resistance to UV color fading, peeling and blistering. Those are useful reasons to consider it for an exterior repaint.

Dunn-Edwards began as a Los Angeles wallpaper store in 1925. Headquartered in Commerce, California, it makes architectural, industrial and high-performance paints and coatings. It merged with Nippon Paint Holdings in 2017 and is a wholly owned subsidiary.

Preparation is part of the job

Evershield’s stated use includes properly prepared and primed surfaces. Plan on primer suited to the material you’re painting. Wood trim and stucco walls can take the same finish paint while needing different preparation.

Painting over a weak layer leaves your new finish attached to that weak layer. Remove loose coating and find out why it let go. If moisture is getting behind the paint, fix its route in before preparing and priming the surface.

Resistance to fading and peeling

Dunn-Edwards claims Evershield resists UV color fading and film failures, including grain-cracking, peeling and blistering. These claims address the problems that turn an exterior repaint into another repair job. When weighing reviews, look for the surface, the preparation and what actually happened to the finish.

For new masonry, Dunn-Edwards also claims resistance to alkali burnout and the blotching and fading that can occur on those surfaces. Its claimed efflorescence resistance addresses the salt deposits that can show on masonry. Where deposits already exist, address the moisture carrying those salts and prepare the surface before priming.

Painters on ladders painting a purple house

Judge Satin/Low Sheen on your surface

Evershield is listed in Satin/Low Sheen. Think of a restrained shine, with the final appearance affected by surface texture, porosity and atmospheric conditions. Smooth trim and rough stucco reflect light differently. Judge a prepared and primed sample on each surface in the light where it’ll be used.

For touch-ups, keep the application tool and surface texture consistent with the original work. Let a test patch dry and view it from several angles. If it stands out, repaint to a corner or another natural break.

Freshly painted two-story home with a porch

Keep small repairs small

Dunn-Edwards recommends cleaning exterior surfaces and touching up or repairing the finish as needed. Pay attention to edges and joints where water can get behind the coating. Inspect painted surfaces at least once every six months.

Product specifications

PropertyEvershield
ManufacturerDunn-Edwards Corporation
Paint type100% acrylic exterior paint
Listed finishSatin/Low Sheen
Suitable surfacesProperly prepared and primed masonry, concrete, tilt-up, block, stucco, plaster, wood and exterior metal
Factors affecting glossSurface texture, porosity and atmospheric conditions
Painter on a ladder painting a white house

Frequently Asked Questions

Is Dunn-Edwards Evershield a good exterior paint?

Evershield is a 100% acrylic exterior paint with claimed resistance to fading, peeling and blistering, useful qualities for an exterior repaint. Those claims aren’t an independent performance rating. If you’re comparing reviews, give the most weight to jobs with surfaces and preparation like yours.

Ready to Get Started?

Our paint & finish specialists can help you find the right Dunn-Edwards Evershield products for your project.