Brand
Brand Overview Roofing

Epic Steel

Epic Steel Metal Roofing and Siding Epic Steel

Epic Steel metal roofing and siding give builders panel choices for the roof pitch and wall appearance a project calls for. Tuf Rib comes cut to length to reduce field cutting, while Snap Batten gives you the wood-batten look in steel with hidden fasteners.

Epic Steel is a family-owned manufacturer based in Missoula. It makes metal roofing and siding in the United States. Its range includes exposed-fastener roofing, standing-seam roofing and steel wall siding.

Roofing starts with the pitch

Settle the roof pitch before choosing a profile. Tuf Rib lists a 3:12 minimum slope, while Snap Lock lists 2:12. At a 2:12 pitch, Snap Lock is the one of those two to carry into the specification review.

Tuf Rib’s cut-to-length panels let you match panel lengths to the roof layout. Get the measurements settled before fabrication, and figure panel counts using its 36-inch coverage after overlap.

Tuf Rib can go over open purlins or a solid substrate. The builder is responsible for purlin spacing that meets the project’s engineering requirements. Set that spacing from the engineering.

Siding for the wall you want

Snap Batten is the starting point when you want the appearance of wood batten siding with hidden fasteners. Its clip-and-snap design suits full walls and wainscot applications. Use it for siding only.

Work from the actual Snap Batten panel width when laying out the wall because coil size and material thickness can change it. Plan cap joints on the elevation drawing: batten caps come only in 10-foot lengths.

For a wood-grain appearance, Snap Batten’s listed colors include Antique Barnwood, Rough Sawn Cedar and Gray Rough Sawn Cedar. Judge the finish from a physical color chip alongside the other exterior materials before ordering.

Farmhouse with a standing seam metal roof

Match the finish and finishing pieces

Warranty terms depend on the paint system, and paint systems vary by gauge. Tuf Rib advertises a 40-year paint warranty; Snap Batten advertises up to 35 years. Match the warranty to the selected coating and gauge.

Choose the panel profile before the standard trim. Epic Steel’s foam closure strips are panel-specific, so put the matching trim and closures on the material list with the panels.

Standing seam metal roofs against the sky

Panel specifications

Panel lineListed minimum roof slope or wall applicationSteel gaugesRib height
3′ Tuf Rib3:1228; 26 special order3/4 inch
Snap Lock2:1224, 261.5 or 1.75 inches
Nail Strip3:1224, 261 or 1.5 inches
Snap BattenRecommended for siding only22, 24, 261 inch
Board & BattenWalls only24, 263/4 inch
Flush WallWalls only22, 24, 261 inch

Frequently Asked Questions

Where is Epic Steel made?

Epic Steel is made in the United States by a family-owned manufacturer in Missoula, Montana. The company describes its material as domestically sourced.

What’s the minimum roof pitch for Epic Steel panels?

The minimum depends on the profile. Tuf Rib lists 3:12, while Snap Lock lists 2:12; those aren’t interchangeable at a lower pitch. The panel’s slope limit is the starting point, and the roof assembly still needs the right detailing and engineering.

Can Epic Steel siding look like wood?

Snap Batten gives you the appearance of wood batten siding with hidden fasteners. Its listed finishes include Antique Barnwood, Rough Sawn Cedar and Gray Rough Sawn Cedar. Actual panel widths can vary with coil size and material thickness, so wall layout needs to use the width for your selected material.

What warranty comes with Epic Steel?

Epic Steel’s advertised warranty lengths depend on the panel and paint system: Tuf Rib lists a 40-year paint warranty, and Snap Batten lists up to 35 years. Those durations aren’t a blanket warranty on the roof or installation. Your selected coating, gauge and applicable warranty terms determine the coverage.

Ready to Get Started?

Our roofing specialists can help you find the right Epic Steel products for your project.