Dare electric fencing supplies are for farmers building a fence or fixing the one already in the field. Its insulators, chargers and gate handles cover conductor attachment, fence power and access through the fence. Start with your posts, conductor and gate openings to choose the fittings for your job.
Dare Products, Inc. manufactures and distributes electric fencing equipment and related agricultural products. Robert M. Wilson founded the business in Battle Creek, Michigan, in 1946. Dare is based in the United States and has a manufacturing facility in Battle Creek.
Match insulators to the posts and conductor
For an electric fence, the insulator needs to fit your post and hold your conductor clear of it. The mistake is treating every T-post fitting as interchangeable. LockJawz spring wire T-post clips are specified for non-electric field fence or wire and fit all 1.25–1.33-pound T-posts.
Dare’s wood-post ring insulator is intended for line and corner posts and accepts wire, rope up to 8 mm or half-inch tape.
On an existing electric fence, look for cracked insulators, loose attachments and places where the live conductor touches metal. Fix the attachment that let it move before putting the conductor back in place.
Plan the gate around daily use
A damaged handle with sound anchors and conductor calls for a handle replacement. For a new opening, lay out the handle, anchors and conductor together so the connections suit the posts on both sides. Keep the handle within comfortable reach and the conductor clear of the ground.
Gate connections deserve a close look because they move every time you use the opening. Test the fence beyond the gate with it both open and closed to see how that opening affects the circuit.
Choose the charger around the whole fence
Match your charger to the animals, total conductor length, number of strands, available power and expected vegetation contact. Include grounding in that plan. Count every electrified strand when you’re working out conductor length.
If an existing fence is weak, find the fault before changing the charger. Grass against the conductor, damaged insulators, poor connections and grounding problems can all pull performance down. Clear the contact points and repair the faults, then test again.
Use testing to narrow down a fault
Use a tester intended for electric fencing and follow its connection instructions. Take a reading near the charger, then work outward along the fence. Comparing readings helps you narrow down where the loss starts.
Look closely at joints, gates, corners and places where vegetation reaches the conductor. A loose connection or cracked insulator is easy to miss from a distance. Test again after each repair so you can see what changed.
Wire tension and fitting specifications
Dare’s galvanized-steel, spring-loaded in-line wire strainer handle is specified for the compatible strainers listed below.
Before adding wire tension, check the brace and attachments. Tightening wire increases the load on those parts, so repair loose attachments before tensioning.
| Product | Model or part number | Specified fit | Material or feature |
|---|---|---|---|
| Wood-post ring insulator | 2671W | Wood line and corner posts; wire, rope up to 8 mm, or 1/2-inch tape | |
| LockJawz spring wire T-post clip | TSWC-50 | All 1.25–1.33-pound T-posts; non-electric barbed wire, field fence and high tensile fencing | Zinc-coated spring steel; reusable; installs by hand without crimping |
| In-line wire strainer handle | 1704 | 1703-C and 1703-P wire strainers | Galvanized steel; spring loaded for tensioning |
Frequently Asked Questions
How do I choose a Dare electric fence charger?
Choose for the fence you’ll actually run, including the load from vegetation touching the conductor. A fence-length rating alone isn’t enough to make that decision. If you’re replacing a weak charger, check the fence and grounding first so the replacement doesn’t inherit the same problem.
Which Dare insulators work on wood posts?
Dare’s wood-post ring insulator fits line and corner posts and holds wire, rope up to 8 mm or 1/2-inch tape. Match the insulator to your conductor before installing it. Tape wider than 1/2 inch falls outside that specified fit.
Do I need a special tester for a Dare electric fence?
Use a tester intended for electric fencing and follow its connection instructions. An electric fence delivers pulses, so an ordinary multimeter isn’t a substitute unless it’s specifically designed for that job. A reading at the charger confirms output there; you still need to test farther along the fence to check what reaches the enclosure.
Can I use Dare electric fencing for a temporary fence?
Dare provides a step-by-step guide for building temporary or semi-permanent electric fences. Temporary describes how long the fence stays in place; it doesn’t reduce the need for sound connections and proper grounding. Test the fence after each move, even when you’re reusing the same equipment.
Ready to Get Started?
Our landscape & concrete specialists can help you find the right Dare products for your project.