CURT trailer hitches and towing accessories connect your vehicle to a trailer for hauling tools, equipment or a camper. With more than 1,000 hitch models and vehicle-specific wiring that avoids cutting and splicing, you can match the mechanical and electrical parts to the vehicle and the load.
CURT started in 1993 as a trailer-ball distribution business operated from the back of a car. It’s a Lippert brand specializing in custom-fit trailer hitches and related towing equipment. Its custom-fit trailer hitches are designed, welded and coated in Wisconsin, and those receivers may include imported hardware.
Match the hitch to the vehicle and trailer
Start with your vehicle and the trailer’s coupler. For a trailer that couples behind the vehicle, the usual setup is a receiver hitch, ball mount and trailer ball. Choose the hitch by its specific vehicle application, then check its trailer-weight and tongue-weight ratings. Tongue weight is the load the trailer puts down on the hitch.
The useful weight is what the trailer weighs loaded for the job. Keep the setup within the vehicle manufacturer’s stated capacities and the limit of the lowest-rated towing component, including the receiver, ball mount, ball and coupler.
For a fifth-wheel trailer, CURT offers hitches with legs, rollers and OEM puck-system mounting options; match the truck’s mounting arrangement and capacity, and measure cab-to-trailer clearance for turns.
For contractors and farmers towing gooseneck trailers, CURT offers gooseneck hitches and complete OEM puck-system kits for Ford, GM, Nissan and Ram, with fit depending on the exact truck application.
Get the ball mount and trailer ball right
Choose the ball mount’s rise or drop from measurements. With the vehicle and trailer on level ground, loaded for travel, and the trailer sitting level, compare the receiver height with the coupler height. That’s how you get the trailer riding level.
Match the ball diameter to the size marked on the coupler. Then match its shank diameter and length to the ball mount and check its weight rating. All of those details matter together. The nut needs the thread engagement and tightening specified for that ball.
CURT offers hitch locks, pins and clips to secure the connection at the receiver. A receiver lock is useful when you leave the ball mount installed and want to discourage removal. Match the pin diameter and usable length to the receiver, and make sure its retaining clip or locking end is fully engaged.
Tested hitches and wiring that fits
Each CURT trailer hitch has been tested in accordance with SAE J684. That gives you a specific testing standard behind the hitch. Installation still depends on the exact vehicle and hitch: read the application instructions before starting, use the specified hardware and follow the tightening instructions.
Much of CURT’s electrical line is vehicle-specific, eliminating cutting and splicing. Its listed brake controllers, quick plugs, custom wiring harnesses and adapters use plug-and-play connections. That’s a practical benefit when you’re fitting the electrical side of a towing setup. Choose the parts for your vehicle and its existing towing equipment.
Match electrical functions as well as plug shape. Working trailer lights confirm the lighting circuits are operating; electric trailer brakes also need a compatible controller and a connected brake circuit. Test the trailer’s lights and brakes before towing.
Trailer-ball specifications
These CURT chrome trailer-ball options have different dimensions and ratings. Match every column to the coupler, ball mount and loaded trailer.
| Ball diameter | Shank diameter | Shank length | Weight rating |
|---|---|---|---|
| 2 inches | 3/4 inch | 1-3/4 inches | 3,500 pounds |
| 1-7/8 inches | 3/4 inch | 1-5/8 inches | 2,000 pounds |
Frequently Asked Questions
Are CURT hitches good?
CURT custom-fit hitches have a practical strength in their finish: a rust-resistant liquid A-coat covers the hitch inside and out, with black powder coat over it for rust, chip and UV protection. That matters on equipment exposed to weather and road spray. You still need the right vehicle fit and enough capacity for your loaded trailer.
How do you install a CURT trailer hitch?
Installation depends on the hitch and your exact vehicle application. Some require drilling and others don’t, so a no-drill installation on one vehicle tells you nothing about another. You need the application instructions, specified hardware and tightening requirements before starting; the receiver’s weight rating alone won’t tell you how it mounts.
Where are CURT hitches made?
CURT custom-fit trailer hitches are designed, welded and coated in Wisconsin, so those receivers are made in the USA, though they may include imported hardware. That manufacturing statement applies to the custom-fit receivers; it doesn’t establish where every towing accessory is made.
How do you use a CURT fifth-wheel hitch?
You need the operating instructions for your particular CURT fifth-wheel hitch each time you use it. A hands-on demonstration should cover the procedures, and you should be able to show you understand them before towing. Cab and bumper clearance also matter during turns, so the truck and trailer need to be measured before the hitch is installed.
Ready to Get Started?
Our tool specialists can help you find the right CURT products for your project.