Cinch steel railing is for homeowners putting a railing around a deck or along stairs. The Residential line is designed for DIY installation, with factory-assembled, finished sections that save you from assembling each panel one baluster at a time.
Cinch Outdoor Living is the brand behind the railing systems and accessories. Its sections come assembled and finished from the factory. Its accessories include flush cap bracket kits for wood or composite top rails.
Choose the height and construction
Residential and Heavy-Duty Residential both have a stated overall rail height of 38 inches. Residential has 1-inch top and bottom rails; Heavy-Duty Residential uses heavier-gauge steel and 1¼-inch top and bottom rails. Choose Heavy-Duty Residential when you want heavier steel at the same 38-inch height.
For a project requiring 42-inch railing, Cinch Commercial has a stated overall rail height of 42 inches.
Work out the panels and posts together
Cinch offers level panels and stair panels, along with mid, corner, end and blank posts. The mistake to avoid is counting posts without marking where the railing ends and turns. Sketch the level runs, stairs, corners and ends, then match each post to its position.
Pivoting stair brackets and hinged baluster panels accommodate different stair configurations. Treat the stairs as their own part of the layout, with the panel following the stair slope.
Cinch gate components include gates, self-closing hinges and gravity latches.
Plan the top cap with the railing
Cinch’s flush cap bracket kits let you add a wood or composite top rail cap. That gives you a choice in the surface under your hand and the look across the whole run. Choose the cap material while you’re planning the railing.
The steel is pre-galvanized, with zinc phosphate and a powder coating. The textured satin finish helps hide dirt, fingerprints and blemishes. Keep the finished sections off rough surfaces while you’re handling them.
Residential railing dimensions
Panel height and overall rail height are separate measurements. Both residential configurations pair a 34-inch panel with a stated 38-inch overall rail height. The bottom sweep is the space between the bottom rail and the deck surface.
| Specification | Residential | Heavy-Duty Residential |
|---|---|---|
| Stated overall rail height | 38 inches | 38 inches |
| Post height | 40 inches | 40 inches |
| Panel height | 34 inches | 34 inches |
| Top and bottom rail size | 1 inch | 1¼ inches |
| Bottom sweep | 4 inches | 4 inches |
| Steel construction | Pre-galvanized steel | Heavier-gauge pre-galvanized steel |
Frequently Asked Questions
Do Cinch railing panels come assembled?
Yes. Cinch railing panels come factory assembled and finished, with factory-installed brackets. You aren’t building each section one baluster at a time, but you still need to lay out the railing runs and post locations.
Can you add a wood or composite cap to Cinch railing?
Yes. Cinch’s flush cap bracket kits let you add a wood or composite top rail cap. The bracket kit provides the connection, so plan the cap and brackets together.
Ready to Get Started?
Our decking & railing specialists can help you find the right Cinch products for your project.