Brand
Brand Overview Cabinets

Blum

Blum Cabinet Hinges and Drawer Slides Blum

Blum cabinet hinges and drawer slides are for fitting kitchen doors and drawers, whether you’re building cabinets or replacing hardware. Concealed runners keep the hardware out of sight on wooden drawers, and Blum’s handheld hinge-drilling tool helps you drill the door pattern. Settle the hardware before building the drawers.

Julius Blum GmbH is a family-owned company based in Höchst, Austria. Julius Blum founded it in 1952. The company develops and manufactures hinge, drawer, lift and pocket systems for furniture.

Match the hinge and mounting plate

Start with the cabinet construction and measure how far the door covers the opening. The hinge and mounting plate need to work together for that overlay. On replacement work, check the existing door boring as well. Matching a hinge by appearance is an easy way to overlook the plate that determines how it fits.

Give the screws the same attention. The screw head must seat properly in the fitting, and the length must suit the material receiving it. An overlong screw can come through a finished surface. Check the specified fastener and the material thickness before fastening the plate.

For a replacement, confirm the exact hardware match before committing to the fitting. Blum’s identification guidance distinguishes component numbers from part numbers and calls for pictures. Record the mounting plate along with clear views of the hinge’s top, side and back.

Get the drilling right before assembly

Blum offers a handheld tool for drilling Blum hinge patterns. That gives you a practical way to prepare the door boring. Use the layout for the exact hinge, check the door thickness and control the drilling depth. Prove the setup on scrap before boring a finished door.

For MOVENTO and TANDEM, the hook and locking-device fixing positions can be pre-drilled. Use the selected runner’s layout and keep your reference edges consistent across the drawer parts. Check the drilling setup against the actual hardware before repeating it across the kitchen.

Open kitchen drawer with a utensil organizer under the cooktop

Choose the drawer construction first

Blum offers concealed runners for wooden drawers. For an existing drawer, compare its construction, the cabinet opening and the mounting space with the selected runner’s installation drawing. Those checks determine whether the drawer box can stay.

MERIVOBOX is a drawer system designed for quick assembly, making it an option when you’re choosing the drawer construction from the start.

Blum also offers lift systems for tall and wall cabinets; select the mechanism around the door dimensions, weight and available space.

Deep kitchen drawer with dish organizers pulled fully open

Adjust after the cabinet is square

Get the cabinet square and the runners positioned correctly before setting the drawer fronts. Then work through the alignment and check full drawer travel with neighboring fronts in place.

On doors, correct rubbing and uneven gaps before judging the closing action. Use the exact hinge’s instructions for adjustments to its closing mechanism. For a door near a wall, match any opening restrictor to the hinge and check the full swing with the handle installed.

Selected hardware details

HardwareDetail
M BLUMOTION 105°Developed for flat-pack furniture and its assembly process.
CLIP top BLUMOTION 105°Accommodates separate installation of the mounting plate and hinge.
MOVENTOSupports adjustment to a 2.5 mm front gap.
Stacked soft-close inner drawers holding towels

Frequently Asked Questions

How do I install a Blum hinge?

Match the hinge and mounting plate to your cabinet construction and door overlay, then use that hinge’s drilling layout. Test the boring depth on scrap of the same thickness as the door; a clean hole is no help if it breaks through the face. Support the door while attaching it so its weight doesn’t pull against a partly secured plate.

How do I adjust the soft-close speed on a Blum hinge?

First check whether your particular hinge has an adjustment for its closing action. The screws that line up the door aren’t speed controls, so turning those can leave you with crooked gaps instead of a different closing speed. Follow the hinge’s instructions for the closing mechanism once the door swings without rubbing.

How do I install Blum drawer slides?

Start with the installation drawing for your exact runners and check the drawer dimensions before drilling. Keep the runners parallel and use the same reference point on both cabinet sides; measuring from mismatched edges can put one runner ahead of the other. Test the drawer’s travel before setting the front, because front adjustment won’t straighten a binding runner.

How do I install a restrictor clip on a Blum hinge?

Confirm that the restrictor clip fits your exact hinge, then follow the fitting instructions for that combination. After installation, open the door gently and check clearance at the handle. The door itself can clear a wall while the handle still hits it.

Ready to Get Started?

Our cabinet specialists can help you find the right Blum products for your project.