Brand
Brand Overview Building Materials

Apollo

Apollo PEX Pipe and Plumbing Fittings Apollo

Apollo PEX pipe is for running household water lines, with PEX-B tubing in coils for long runs and straight sticks for shorter sections. A continuous run through accessible framing can save joints along the way. Choose the connection system while you’re planning the route.

Apollo’s retail plumbing family is supplied and warranted by The Mosack Group, Inc., based in Mint Hill, North Carolina. Glenn Mosack started the company in 2018. He formed it by acquiring Conbraco Industries’ retail division. Its Apollo range includes potable-water pipe, fittings and connection tools.

Match the pipe and fitting system

Treat Apollo PEX-A and PEX-B as separate fitting systems. Apollo Expansion PEX is PEX-A for hot- and cold-water potable plumbing, with an exclusive requirement for ASTM F1960 fittings. The PEX-B pipe warranty condition specifies ASTM F2159 fittings. Match the pipe type, fitting designation and connection method before choosing tools.

For hydronic heating, cooling or snow melting, Apollo’s oxygen-barrier PEX-B has an exterior layer that resists oxygen passage, accepts water or water/glycol mixtures, and carries a pipe warranty condition specifying ASTM F2159 fittings.

Coil of orange PEX pipe

Plan the run and the connections together

A coil suits a long continuous route where it saves connections. Straight sticks are easier to lay out for short, exposed sections. Leave enough access to position the connection tool squarely at each joint.

Use the pipe’s flexibility where the route allows a supported bend within its installation requirements. An elbow belongs where the layout needs a tighter change of direction. Forcing a bend into cramped framing risks a kink, so give each turn the clearance required for the pipe.

Apollo PEX-B comes in red, white and blue for identifying hot, cold and main water lines. Keeping that identification consistent makes the piping easier to follow during the next repair. Choose fittings from the pipe marking and connection requirements.

Apollo offers cutters, crimp tools, pinch-clamp tools and gauges. The fitting and fastener determine the tool you need. Settle those parts of the connection together.

Finish the checks before covering the pipe

A connection is much easier to inspect and correct while it’s exposed. Apollo requires field pressure testing before piping is concealed, including concealment in concrete. Complete the required pressure test before closing walls or covering the run.

Buried brass connections need protection as well. Apollo requires brass fittings to be wrapped when buried; follow the specified burial protection and installation procedure.

Plumbing rough-in with PEX lines in a framed wall

Apollo PEX-B specifications

SpecificationApollo PEX-B
Intended usePotable-water distribution
MaterialCross-linked high-density polyethylene
DimensionsCopper Tube Size
ColorsRed, white and blue
Pipe formsStraight sticks and coils
Stated operating limit140°F at 80 psi
Pipe warranty fitting conditionASTM F2159 fittings
Brass plumbing fittings and valves

Frequently Asked Questions

How do you use an Apollo PEX crimp tool?

Start with a square pipe cut and a fitting and crimp ring matched to your tubing. Seat the fitting and position the ring according to the connection instructions, then hold the Apollo PEX crimp tool square over the ring and complete the crimp. Check the finished crimp with the specified gauge; a connection that looks tight still needs that check.

How do you calibrate an Apollo PEX crimp tool?

Follow the calibration procedure for your particular Apollo PEX crimp tool, including its adjustment and gauge checks. After adjustment, make a trial connection and check the crimp with the specified gauge before continuing. Handle resistance alone won’t tell you whether the tool is making an acceptable crimp.

Ready to Get Started?

Our building materials specialists can help you find the right Apollo products for your project.