AdvanTech subflooring is for builders laying the base beneath a finished floor. AdvanTech X-Factor adds an overlay to the OSB base, giving you a distinct panel surface to consider for your assembly. Choose the panel alongside the finished flooring so surface preparation and underlayment work are part of the plan.
AdvanTech is the subflooring and sheathing brand of Huber Engineered Woods LLC. Its parent, J.M. Huber Corporation, is family-owned and headquartered in Edison, New Jersey. The parent company’s history dates to 1883.
Choosing AdvanTech or AdvanTech X-Factor
AdvanTech is OSB, with a base panel made from layers of wood strands. AdvanTech X-Factor adds an overlay on that base. Make the surface decision alongside the rest of your floor assembly: if the job calls for the X-Factor overlay, account for it in the preparation work. Sanding X-Factor to address moisture absorption may remove the overlay and affect its appearance.
Moisture-related sanding can interrupt the handoff to the flooring crew. For panels manufactured on or after October 4, 2021, the commercial warranty covers both lines with a guarantee against sanding due to moisture absorption during installation, provided installation is completed within 500 days of purchase. That clock starts on the purchase date.
Adhesive and a clean bonding surface
Where your assembly calls for subfloor adhesive, use one compatible with the panel and follow its application instructions. Loose sawdust and debris get between the adhesive and the material you’re trying to bond. Clean as the work advances so the next panel lands on a prepared surface.
Keep adhesive application and fastening close together. Spreading adhesive too far ahead can leave the crew trying to assemble a bond after its working time has passed. Apply and fasten within the adhesive’s specified working time.
Planning the finished floor
Resilient flooring can show joints and surface irregularities underneath it, and some flooring systems require underlayment. Settle those requirements while you’re choosing the floor assembly. Finish-floor preparation belongs in the plan before the subfloor goes down.
For the subfloor installation, plan joint support and follow Huber Engineered Woods’ installation instructions and guidance. Settle panel selection, spacing, fastening and adhesive requirements before the crew starts laying sheets.
AdvanTech panels also have exterior wall and roof sheathing applications in accordance with Huber Engineered Woods’ installation instructions and guidance.
Panel comparison
| Panel line | Base construction | Overlay |
|---|---|---|
| AdvanTech | OSB with wood strand layers | |
| AdvanTech X-Factor | OSB with wood strand layers | Overlay on the OSB base |
Frequently Asked Questions
Is AdvanTech subfloor worth it?
If moisture-related sanding would hold up your job, AdvanTech’s commercial no-sanding guarantee is a concrete reason to consider it. For panels manufactured on or after October 4, 2021, that guarantee covers sanding needed because of moisture absorption during installation, provided installation is completed within 500 days of purchase. That doesn’t mean your finished flooring won’t need separate underlayment or other preparation.
How do you install AdvanTech subfloor?
Get the framing flat before laying AdvanTech subfloor; panels won’t correct an uneven supporting surface. Follow Huber Engineered Woods’ installation instructions for panel spacing and fastening. If you’re using adhesive, coordinate spreading and fastening with its working time so it doesn’t sit too long before the panel is secured.
Is AdvanTech OSB?
Yes, AdvanTech is OSB made with wood strand layers. If you’re comparing it with OSB, you’re comparing a brand with a material category. The useful comparison is between specific panels suited to your floor’s structural requirements.
What’s the difference between AdvanTech and AdvanTech X-Factor?
AdvanTech X-Factor has an overlay on the OSB base panel. That matters during floor preparation because sanding to address moisture absorption may remove the overlay and affect its appearance. If you’re planning a finished floor that needs surface preparation, that added layer needs to be accounted for.
Ready to Get Started?
Our building materials specialists can help you find the right Advantech products for your project.